Troubleshooting the OneForAll OARC03G Remote Control

Troubleshooting the One For All OARC03G Remote Control
Problem:	Solution:
My brand is not listed in the code section:	Try the procedure described in The Search Method section.
The remote does not operate my device(s):	Try all the codes listed for your brand. Try the procedure described in The Search Method section.
The remote is not performing commands properly:	You may be using the wrong code. Try repeating the Direct Setup using another code listed under your brand or start the search method over again to locate the proper code.
Problems changing channels:	Enter the channel number exactly as you would on your original remote.
Video not recording:	As a safety feature on this remote, you must press the (Record) key twice.
The remote does not respond after pressing a key:	Make sure you are using new batteries and are aiming the One For All remote at your device.
The (power) does not blink when I press a key:	Replace batteries with 2 fresh, new AA alkaline batteries.
For additional information:	Please visit: http://www.oneforall.com