Troubleshooting the RCA RP5512I Clock Radio
|
Problem:
|
Solution:
|
Why won't the RP5512I charge my iPod? |
You may charge the battery of your iPod through the universal dock for iPod while the unit is turned off (standby mode) or in the iPod mode. Charging control should be operated on the iPod.
This unit is only compatible with the following iPod's:
- iPod with video (30GB, 60GB, 80GB) 5th generation
- iPod photo (20GB U2 Special Edition, 30GB U2 Special Edition, 40GB, 60GB) 4th generation
- iPod (20GB, 20GB U2 Special Edition, 40GB) 4th generation
- iPod nano (2GB, 4GB, 8G) 1st, 2nd & 3rd generations
- iPod mini (4GB, 6GB) 1st & 2nd generations
- iPod touch
- iPod classic

* For the latest iPod models, please use the adapter provided with your iPod.
|
How do I use the Auto Clock Set feature on the RP5512I? |
- Set time zone: Slide the time zone selector at the bottom of the unit to Eastern, Central, Mountain or Pacific time zone.
- Set Daylight saving time: Press and hold the Daylight Saving Time button at the bottom of the unit to turn on/off in areas observing/not observing such time change.
- Plug the clock in for power and the current time will be shown automatically. However, the batteries can also be exhausted and we recommend that you replace the batteries every year.
In case the memory holding batteries are accidentally removed, set the clock manually as below:
- Press SET on the top of the unit until the clock setting icon flashes on the display.
- Rotate the knob on the top of the unit to set the clock time. The time decrements or increments follows by a faster rate when you rotate and hold the knob. The clock setting icon flashes when you are setting the time. AM or PM icon also shows beside the time.
- To save and exit the clock setting, wait for about 5 seconds or press SET until the clock setting, WAKE 1 or WAKE 2 icon is off. The clock time is now set.
|
Why am I getting an error message when using the AUX/USB port on the RP5512I? |
- The USB jack requires a USB device that is MSC (Mass Storage Class), not MTP.
|
For more information, please refer to your Owner's Manual.
Comments
0 comments
Article is closed for comments.