OneTouch Setup Wizard Tips for ARRU449 Universal Smart Remote Control

OneTouch Setup Wizard Hints and Tips for ARRU449 Universal Smart Remote Control
The OneTouch Setup Wizard takes you through the activity with the remote. This allows the Smart Remote to learn how you have your system connected. Take your time and follow the on-screen prompts to teach the remote how you've got your system configured. The remote offers audio cues as well, to tell you when an action is required or when it's sending a command. Notes: If you don't want to set up the OneTouch activity now, just press the No soft key. The Smart Remote will ask you to set up the OneTouch activity the next time you play the activity. The Smart Remote offers two methods of activities - OneTouch performs all the steps automatically once you've taught the remote about your setup. Guided Activities take you through on-screen prompts to perform the activity each time you play it. The Smart Remote does OneTouch activities by default. For more information on OneTouch Activities, Click Here.
	First the remote wants to make sure all the devices in this activity are turned on . TIPS: Make sure the remote is pointed at the device you're trying to turn on. Wait a few seconds between key presses. It takes a few seconds for the remote to turn your device on, and your device might take a few more seconds to warm up.
	Then, the Smart Remote wants you to teach it the way to switch inputs on your TV. To do this: Use the Smart Remote to switch your TV by one input (from Video 1 to Video 2, for example). IMPORTANT: If you use arrow keys, make sure you use the ones on the bottom of the remote! Press the Next soft key.
	If the sequence the Smart Remote tells you doesn't match what you use to switch inputs, press the Next soft key to try again. TIP: If this screen tells you your sequence ends with [wait], try entering the input sequence again and use the OK or ENTER key as the last step.
	If you see the TV Inputs Switching screen shown to the left, you'll need to try switching inputs again. Make sure you use keys on the bottom half of the remote and that you're pressing each key firmly.
	Now it's time for you to make sure you've got the input you want for this activity. Each time you press SEL, the remote sends the right key presses to change inputs. Press just once and w