Getting Started with the RCA RCR412C Universal Remote Control
TIP: The four-component universal remote is already programmed to operate most RCA, GE and PROSCAN branded TVs, VCRs, DVD players and satellite receivers. Just press the corresponding key—DVD key for a DVD player; TV key for a television; SAT·CBL for a satellite receiver or a cable box; or the VCR·AUX key for a VCR.
Installing the Batteries:
Your universal remote requires two AA Alkaline batteries (batteries may or may not be included, depending on model).
To install the batteries
- Remove the battery compartment cover.
- Insert the batteries, matching the batteries to the (+) and (-) marks inside the battery compartment.
- Press and push the battery cover back into place.
Note: Reprogramming may be required after batteries are replaced.
Battery Saver
Your universal remote control saves battery power by automatically turning off if any key is pressed for more than 60 seconds. This saves your batteries should your remote get stuck in a place where the keys remain depressed, such as between sofa cushions.
Backlight illumination (available on select models only) 
enables you to see the remote control keys better in the dark. Backlight illumination is toggled on or off with successive key presses of the BACKLIGHT key. When toggled on, the backlighting remains on as long as keys are being pressed. The backlighting turns off six seconds after the last key press. Once the Backlight time has expired, any key press will reactivate backlighting. If the Backlight illumination is on, and the BACKLIGHT key is pressed, the Backlight turns off.
The ON·OFF key powers components on and off.
It also lights up to serve as an indicator light, providing feedback for various functions. When a valid key is pressed, the illuminated ON·OFF key remains lit as long as the key is pressed and turns off when the key is released. The ON·OFF key also blinks in Programming Mode or in Menu Mode to provide feedback.
Notes:
- If you cannot locate your owners manual you can view the codes online and download a manual below however if the code is not listed for your specific component we will NOT be able to provide additional codes
- If your remote is over four years old, it might not be able to operate some newer components, or it may be able to operate some functions but not others.
ADDITIONAL RCA REMOTE CONTROL REFERENCES
The rcaaudiovideo.com site provides step by step videos, an online code finder as well as additional PDFs of Owner-User manuals and code lists. Please see the information below for the latest information.
RCA Online Code Finder
To access the RCA Online Remote Control Code Finder to search for a component code that is compatible with your RCA remote, Click Here.
If you don't see your RCA remote listed by MODEL NUMBER, please send us Feedback saying Code Not Found (just click on How well did this answer your question? below to add feedback) and we will get the codes posted as soon as possible.
User Manual Search
If you don't see your remote control model listed on this support site please send us Feedback saying Manual Not Found (just click on How well did this answer your question? below to add feedback) and we will get the manual posted as soon as possible.
To access the RCA Site for user manuals not found in the support FAQ's Click Here and enter your remote control by MODEL NUMBER and check Manual in the search box at the top left of the page.
Step By Step Videos
Comments
0 comments
Article is closed for comments.