Getting Started with the XMAS100 XM Compact Sound System

 

Getting Started with the XMAS100 XM Compact Sound System 

1. Choose your Radio-specific dock adapter
The Xpress dock adapter is already installed in the Compact Sound System. The Xpress dock adapter can be used with the following radios: the Audiovox Xpress, Audiovox XpressEZ, Audiovox XpressR, and Delphi XpressRC (all radios sold separately). If you are not using one of the Xpress family of radios, you must replace the Xpress dock adapter with the appropriate one for your XM radio.

1. To remove the Xpress dock adapter, lift both sides of the adapter at the same time.
2. Insert the dock adapter for your radio.

If your radio is a Pioneer Inno™ or a Samsung Helix™, you will also need the XM2go Boombox Adapter XMPA1 (Sold separately). After installing the dock adapter, plug the special XM2go Boombox Adapter into place.

2. Insert your radio
To insert your XM Radio into the Compact Sound System, align the radio’s connector with the Sound System’s connector, then carefully but firmly press to secure the radio in place.

TIP! Although designed to fit snugly, we recommend that you remove the radio before moving the Sound System.

3. Connect the antenna

1. Place the antenna:

Position the antenna for best reception, most likely near a
south-facing window.

2. Plug the antenna into the jack labeled Antenna

4. Connect the power

1. Plug the AC power adapter into the jack labeled 12V DC on the Sound System.
2. Plug the other end into any 110 - 120V wall outlet or power source

5. Turn it on

1. Press the power button on the Sound System.
2. Turn on your XM Radio.

TIP! For some radio models, you can enable the Auto-ON feature for ease of use. Refer to your radio’s menu settings and User Guide for instructions. The Helix and Inno need to be powered down manually.

TIP! The Helix and Inno will charge while in the sound system, turn off the sound system if you do not want your Helix or Inno to charge.

6. Listen

1. This Audio System was designed to work with a wide range of XM receivers. You may need to adjust the audio “Line Out Level” in the menu options of
   your receiver to achieve optimal performance from this sound system. Please see your XM receiver user guide for additional information on this adjustment.
2. Use the volume buttons on the Sound System or remote control to adjust the sound level.
3. To control both your XM radio and Sound System use the remote that is included with your sound system. (see page 12) If desired, plug in your headphones to the phones jack. Use the volume buttons on the Compact Sound System to control the headphones. The Sound System’s speakers are muted when the headphones are in use.

Your Sound System has an aux in jack for connecting CD or MP3 players using a mini audio cable (sold separately). Once you have a device plugged in press the aux button to switch from XM mode to aux mode. The LED on the button will be on when in aux mode.

You can also access the User's Manual here.

Thank you for your inquiry - Audiovox values our customers and though this product is no longer in production nor does it qualifiy for warranty or repair due to the age of the product, limited support information may be available through our FAQ Database and/or Customer Service.

Before you proceed check this and other answers related to your product by searching with the Model Number of your product from the Search Box above.

NOTE: Technical support, parts, user manuals (not shown on this FAQ), accessories, or repairs are either limited or NOT available for discontinued models.