Code Retrieval on the RCA RCR615 Universal Remote

Code Retrieval on the RCA RCR615 Universal Remote

Once you've programmed the remote to control your components, record the codes for future reference. If you used the Direct Code Entry method, just make a written note of the codes you programmed in. If you used one of the Code Search methods to program your remote or if you used the Direct Code Entry method but don't remember the code, you need to retrieve each component’s four-digit code. Noting the actual code will save you time if you ever need to program the remote again (e.g., if programming is lost when you change the batteries). If the codes are recorded, you can use the Direct Code Entry method to reprogram your remote.

1. Press and hold the component key whose code you wish to retrieve. The illuminated ON·OFF key turns on.
2. While holding the component key down, press and hold the INFO key. The illuminated ON·OFF key turns off.
3. After holding down both keys for three seconds, the illuminated ON·OFF key turns back on.
4. Release both keys. The illuminated ON·OFF key remains on.
5. Starting with the number 1 key, press and release each number key in the following order (1-9, then 0). The number that causes the illuminated ON·OFF key to blink is the first number of the code. As you find each number of the code, write them down for future reference.
   Note: All TV codes begin with the number 1; all VCR and DVR codes begin with the number 2; all DVDs, the number 3; all AUDIO, the number 4; all satellite receivers and cable boxes, the number 5; all HDTVs, the number 7.
6. Repeat step 5 until you have retrieved all four numbers in the code.
7. After the fourth number is retrieved, the illuminated ON·OFF key blinks briefly, then turns off.
8. To exit the Code Retrieval mode at any time, press and release the CLEAR key.
9. If you press an invalid key during the Code Retrieval process, the remote will not respond. If you do not press a valid Code Retrieval key, Code Retrieval times out after 15 seconds. The illuminated ON·OFF key blinks four times, and then turns off.