Operating the RCA RCR503BR Remote Control

Operating the RCA RCR503BR Remote Control

Battery Installation 

Your RCR503BR universal remote requires 2 new AAA alkaline batteries (sold separately). To install the batteries:

1. Turn the unit over, and remove the battery compartment cover.
2. Insert the batteries, matching the batteries to the (+) and (-) marks inside the battery case.

Menu Function – TV, SAT•CBL•DTC, VCR•DVD

The Menu function on your remote is used to make changes on selected settings. The MENU key operates in TV, DBS and DVD Modes. Each menu varies from brand to brand.

The TV Menu is used to make changes in the TV settings, such as changing color, channels and timers. The SAT•CBL•DTC Menu navigates through the Menu screens to make changes to settings. The VCR or DVD Menu you can navigate to languages, subtitles and more.

To use the Menu function, follow these steps:

1. Press the component button whose menu you wish to access (TV, VCR·DVD or SAT•CBL•DTC).
   
2. Press the MENU key. The menu of the chosen component is shown. Note: Some functions of some brands may not be fully supported.
   
3. To exit the menu mode press the corresponding component key on the remote (TV, VCR·DVD or SAT•CBL•DTC). 
   

Special Notes for Menu Use:

1. In the Menu Mode of RCA, GE and PROSCAN TVs, pressing the MENU key selects the highlighted item. The numeric keys may also be used to select the menu choice.
2. For SONY components, pressing the ENTER key while in Menu Mode returns If your TV, VCR, DVD, satellite receiver, cable box, or digital TV converter does to the previous menu.

Accessing Digital Channels

The INPUT and — (dash) key lets you enter a digital sub-channel number, like 59.1, directly. Use the number keys to enter the main channel number (in this case, “59”). Then press the INPUT (–) key and press the subchannel number (in this case, “1”). The INPUT key has two other functions as well: (1) it toggles through all the video sources connected to your TV; and (2) when the remote is in VCR mode, this button toggles between VCR and the TV input.

$rcaremote