Operating the One-For-All URC6131N Universal Remote Control

Operating the One-For-All URC6131N Universal Remote Control 

Features and Functions

Locate the features on the One For All 6-Device PVR Universal Remote Control and then study the "Key Charts" to learn how they function.

To find out what type of devices can be controlled by each device key after programming, see the "Device Table".

Click Image to Enlarge

Device Table

NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” or “Programming DVD Player/VCR Combo”.

After programming, the One For All 6-Device PVR Universal Remote Control will be able to control the following types of devices:

Click Image to Enlarge

NOTE: Audio Receiver/DVD Player Combos (i.e., Home Theater In A Box) are listed in “Setup Codes for Audio Receivers” on page 27 of the User Manual.

Operating Master Power

1. After programming, point the remote control at the devices and press POWER for at least 2 seconds to sequentially turn on or off your devices. NOTE: When you press POWER for less than 2 seconds, the remote will only send a power command to the currently-selected device. This allows you to still individually power devices on or off.
2. You will see the devices turn on or off according to your programmed sequence.

NOTES:

• The currently-selected device will always turn on first, followed by the remaining programmed sequence. After the master power sequence is complete, the remote will control the first powered-on device.
• If one or more devices does not have a POWER key, the power on/off sequence may be slightly delayed when the remote control signals the device(s). This action is normal.