Operating the Audiovox CE520 CD Shelf System

Operating Instructions for the Audiovox CE520 Shelf System CD Player

Basic Operation

Turning the Unit On/Off: 

1. Press POWER button, the display will illuminate. Select the desired function and the corresponding function indicator will show in the display.
2. Press the POWER button to enter STANDBY. The display illumination will fade and only the clock display will be shown.

Clock Setting - In Standby Mode:

1. Press MEMORY button the Hour and Minutes will flash.
2. Press SKIP/TUNING (DOWN) button.
3. Press SKIP/TUNING (UP) button to set minutes.
4. Press MEMORY button to set hour and minutes, start the clock.

Note: If a button is not pressed for 10 seconds the clock set mode will be exited automatically.

Adjusting the Sound:

To adjust the volume:

1. Press VOL+ to increase the volume.
2. Press VOL- to decrease the volume.

For loud deep bass:

1. Press X-BASS button to increased the low frequency sound level.

WHEN RECORDING: Adjustments to the VOLUME control or the X-BASS control will not affect the recording.

FOR PRIVATE LISTENING: Connect a headphone (3.5mm stereo mini-plug) to the PHONES jack. When the headphone is connected, speakers are automatically disconnected.

Timer Operation - For Remote Control Only:

The power can be turned on and off automatically at a preset time so that you can wake up to tape music, CD, radio or AUX. Make sure the clock is set the correct before the timer setting.

Timer Setting - at standby mode:

1. Press MODE/REMAIN button until ON/OFF is in the display.
2. Press MEM button in clock mode. Hour and minutes will flash.
3. Press TUN + buttons to set correct hour.
4. Press TUN - buttons to set the correct minutes.
5. Press MEM button to store the ON/OFF time. It will return to normal mode.

Play Timer:

1. Set the time of the timer-on and timer-off.
2. Select the desired program source with the FUNCTION.
   TUNER: Select a band and station.
   TAPE: Insert the cassette tape.
   CD: Insert a disc.
3. Press TIMER. TIMER appears in the display.
4. Press POWER to standby mode.
5. For cassette playback, press PLAY. At the timer-on time, the system turns on automatically.

Record Timer:

The system will record a radio broadcast at a preset time.

1. Set the time of the timer-on and timer-off.
2. Set to TUNER.
3. Select a band and station.
4. Insert the cassette tape for recording.
5. Press TIMER. TIMER appears in the display.
6. Press POWER to standby mode.
7. Press REC (record) which also engages PLAY.

Cancel the timer function:

1. Press the SHIFT and TIMER button until the timer indicator turn off.

Sleep Setting (for remote control only): When the sleep timer is used, the power is automatically turned off after the specified time passes.