Programming the RCA RCU403 Universal Remote Control

Programming the RCA RCU403 Universal Remote 

Programming for TV:

1. Manually turn on the TV. Find the three digit code for your TV in the code list below.
2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3. Press and release the TV button (The INDICATOR LIGHT will blink then remain lit).
4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.
5. Aim the remote at your TV and press the ON•OFF button. Your TV should turn off.
   Note: If your TV does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method below.
6. With your TV on, press CH+ (CHANNEL UP) If the TV responds, no further programming is required.

Programming for VCR:

1. Manually turn on the VCR. Find the three digit code for your VCR in the code list below.
2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3. Press and release the VCR button (The INDICATOR LIGHT will blink then remain lit).
4. Enter the code using the Number Buttons.
5. Aim the remote at your VCR and press the ON•OFF button. Your VCR should turn off.
   Note: If your VCR does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method below.
6. With your VCR on, press CH+ (CHANNEL UP). If the VCR responds, no further programming is required.

Programming for Cable Box:

1. Manually turn on the Cable Box. Find the three digit code for your Cable Box in the code list below.
2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3. Press and release the CABLE button (the INDICATOR LIGHT will blink then remain lit).
4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.
5. Aim the remote at your Cable Box and press the ON•OFF button. Your Cable Box should turn off.
   Note: If your Cable Box does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method below.
6. With your Cable Box on, press CH+ (CHANNEL UP). If the Cable Box responds, no further programming is required.

Programming with Code Search:

If your TV, VCR, or Cable Box does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following the steps below:

1. Turn on the device you wish to program.
2. Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH.
3. Press and release the device button for the device you are programming. The INDICATOR LIGHT will blink once, then remain lit.
4. Press and release ON•OFF until your device turns off. Important: You may have to press ON•OFF up to 200 times.
5. When your device turns off, press ENTER, the INDICATOR LIGHT will turn off.

Identifying Codes from your Universal Remote:

If you need to find the three-digit code for your TV, VCR, or Cable Box after your device is set-up then use this procedure:

1. Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH.
2. Press and release the d