Setting the Clock on the RCA RP5435, RP5435R AM/FM Clock Radio

Setting the Clock on the RCA RP5435, RP5435R AM/FM Clock Radio 

BEFORE YOU PLUG THE CLOCK IN

1. Set your Time Zone

You may slide the TIME ZONE selector at the back of the unit to Eastern (EST), Central (CST), Mountain (MST) or Pacific (PST)

2. Set Daylight Savings

You can slide the DST switch at the back of the unit to turn on/ off in areas observing/ not observing such time change.

WARNING: Please avoid playing with these buttons after plugging in and entering the Clock/Alarm set mode.

Auto Clock Set

You do not have to set the clock time as a built-in automatic time set system is equipped in this clock powered by 3V (2 X AA batteries, included). All you have to do is to plug this clock for power and current time will be shown automatically. However, the batteries can also be exhausted and we recommend that you replace the batteries every 2-3 years.

Setting the Clock

1. Slide the switch /WAKE1/ WAKE2/ on the top of the unit to clock position.

2. Press <<REV or FWD>> to set the clock time. The time decrements or increments will follow by a faster rate when you press and hold the buttons. The “:” between hour and minute time flashes when you are setting the time. AM or PM icon will also beside the time.

3. Slide the switch /WAKE1/ WAKE2/ on the top of the unit to lock position when finished.

You can also access the User's Manual here.