Programming the RCA RCR660 Universal Remote Control NaviLight6

Programming the RCA RCR660 Universal Remote NaviLight6

Programming the Remote:

Your universal remote can operate a variety of brands of components. In order for your universal remote to control your components, you need to program the remote with the codes that match the components (See Code Lists enclosed). These codes enable the remote to communicate with your components. Each brand and each component has its own “language,” and, by programming the correct codes into
your remote, you tell the remote to “speak the same language” as your components.

There are four methods you can use to program your remote control to operate your components. Most components can be programmed in one of these four ways. Try them in the order listed:

1. Brand Code Search and Entry
2. Direct Code Entry
3. Manual Code Search and Entry
4. Auto Code Search and Entry.

In order to control combo units, like TV/VCRs, TV/DVDs or TV/VCR/DVDs, use the combo codes in the Code List to program the individual corresponding component keys. Once programmed successfully, the TV key controls the TV functions on your unit, and the DVD and VCR keys control the DVD or VCR functions, respectively. There is a specific section in the Code Lists for combo units. The codes in the combo section should be tried first, using Direct Code Entry on the TV and DVD or VCR keys. If this is unsuccessful, use Manual or Auto Code Search to program the remote to control your combo unit. Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the component you are currently programming the remote to control. DVR·AUX Key

Important: THE DVR·AUX key defaults to program a DVR. If you want the DVR·AUX key to control a component other than a VCR (an additional TV or DVD, for example), it is necessary for you to preprogram the DVR·AUX key. See image:

Brand Code Search and Entry:

If your brand is listed in the Brand Code List, you may be able to program your universal remote by searching through only the Code Lists for that specific manufacturer. Brand Code Search and Entry can be the quickest method to program your remote, if your component is one of those brands listed. If your brand is not listed in the Brand Code List, use one of the other programming methods that follow.

NOTE: Brand Code Search and Entry is supported for TV, VCR, DVD and SAT/CBL brands. You cannot use the Brand Code Search method for AUDIO, DVR and HDT