Operating the RCA RCU430, RCU430D Universal Remote Control

Operating the RCA RCU430, RCU430D Universal Remote

Battery Installation 

Your RCU430 Universal Remote requires two (2) new AAA alkaline batteries. To install the batteries:

1. On the back of the remote, push down on the tab and lift the cover off.
2. Match the batteries to the + and - marks inside the battery case, then insert the batteries.
3. Press the battery cover back into place.

Button Description

INDICATOR LIGHT: The INDICATOR LIGHT flashes to show that the remote is working.

POWER: The POWER button operates the same as your original remote. Note: Some RCA, GE and Proscan models require you to press the device key to turn the device on and the power key to turn the device off.

CODE SEARCH: Used to program the remote or to search through codes.

SLEEP: The SLEEP button allows you to set a time to turn off the TV automatically.

TV, VCR, CABLE: The TV, VCR, and CABLE buttons are used to select the device you want to control.

VOL & CHANNEL: The VOL (Volume) and CHANNEL buttons operate the same as on your original remote.

MUTE: The MUTE button operates the same as on your original remote.

PREV CH: The PREV CH (Previous Channel) button operates the same as on your original remote.

0-9: The number buttons operate the same as on your original remote, and are used for entering device codes.

TV•VCR: The TV•VCR button operates the TV•VCR function of your VCR.

ENTER: The ENTER button operates the same as on your original remote.

REW, PLAY, FF, REC, STOP, PAUSE: The REW (Rewind), PLAY, FF (Fast Forward), REC (Record), STOP, and PAUSE buttons operate the same as on your original VCR or remote. You must press the REC button twice to begin recording.

Sleep Feature

This feature will turn off your TV at the time you choose from 1 to 99 minutes.

To Program Sleep Feature:

1. Press and hold the SLEEP button. INDICATOR LIGHT will stay lit. Release the SLEEP button.
2. Enter time in minutes using the numerical key pad. Minutes 1 thru 9: press 0 before the actual number. (Maximum: 99 minutes)
3. Leave remote aimed at television. (Sleep Feature will not work unless remote is left aimed at television.)

To Turn Off The Sleep Timer:

Sleep timer program will be cancelled and the clock reset to zero by either of the following:

• Press and hold SLEEP button until INDICATOR LIGHT blinks OR
• Press POWER button, turning TV OFF.

$rcaremote