Programming the RCA RCU4GLW Niteglo Remote Control

Programming the RCA RCU4GLW Niteglo Remote Control 

Programming Your Universal Remote For TV:

1. Manually turn on the TV.
2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3. Press and release the TV button (the INDICATOR LIGHT will blink then remain lit).
4. Find the three digit code for your TV in the code list starting below and enter it using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.
5. Aim the remote at your TV and press the POWER button. Your TV should turn off.
   Note: If your TV does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method below.
6. With your TV on, press CHANNEL UP. If the TV responds, no further programming is required.
7. Write your code down for future reference.

Programming Your Universal Remote For VCR:

1. Manually turn on the VCR.
2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3. Press and release the VCR button (the INDICATOR LIGHT will blink then remain lit).
4. Find the three digit code for your VCR in the code list starting below and enter it using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.
5. Aim the remote at your VCR and press the POWER button. Your VCR should turn off.
   Note: If your VCR does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method below.
6. With your VCR on, press CHANNEL UP. If the VCR responds, no further programming is required.
7. Write your code down for future reference.

Programming Your Universal Remote For Cable Box:

1. Manually turn on the Cable Box.
2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3. Press and release the CABLE button (the INDICATOR LIGHT will blink then remain lit).
4. Find the three digit code for your Cable Box in the code list starting on the following page and enter it using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.
5. Aim the remote at your Cable Box and press the POWER button. Your Cable Box should turn off.
   Note: If your Cable Box does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method below.
6. With your Cable Box on, press CHANNEL UP. If the Cable Box responds, no further programming is required.
7. Write your code down for future reference.

The AUX Button: The AUX Button allows you to assign another TV, VCR or Cable Box to be controlled.

1. Manually turn on the device you wish to assign to the AUX button (TV, VCR or Cable Box).
2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3. Press and release the AUX button. The INDICATOR LIGHT will blink.
4. Press TV, VCR or CAB (depending on which device you wish to program). The INDICATOR LIGHT will blink again then remain lit.
5. Find the three digit code for the device you wish to program in the code list. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.
6. Aim the remote at your device and press the POWER butt