Programming the RCA RC800L-C or CRCU805MSL Universal Remote Control

Programming the RCA RC800L or CRCU805MSL Remote 

Programming for TV:

Most RCA, GE and ProScan TVs will not require programming. Check to see if your TV responds to the remote before you begin programming.

1. Manually turn on the TV. Find the three digit code for your TV in the code list below.
2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3. Press and release the TV button (The INDICATOR LIGHT will blink then remain lit).
4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process.
5. Aim the remote at your TV and press the ON•OFF button. Your TV should turn off.
   Note: If your TV does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method below.
6. With your TV on, press CH+ (CHANNEL UP) If the TV responds, no further programming is required.
7. Enter your code here for easy reference.

Programming for VCR1 and VCR2:

Most RCA, GE and ProScan VCRs will not require programming. Check to see if your VCR responds to the remote before you begin programming.

1. Manually turn on the VCR. Find the three digit code for your VCR in the code list starting below.
2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3. Press and release the VCR1 button (The INDICATOR LIGHT will blink then remain lit).
4. Enter the code using the Number Buttons. After your code is entered the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process.
5. Aim the remote at your VCR and press the ON•OFF button. Your VCR should turn off.
   Note: If your VCR does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method below.
6. With your VCR on, press CH+ (CHANNEL UP). If the VCR responds, no further programming is required.
7. Enter your code here for easy reference.

Programming for DVD:

Most RCA, GE and ProScan DVD systems will not require programming. Check to see if your DVD System responds to the remote before you begin programming.

1. Manually turn on the DVD System. Find the three digit code for your DVD System in the code list below.
2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3. Press and release the DVD button (The INDICATOR LIGHT will blink then remain lit).
4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process.
5. Aim the remote at your DVD System and press the ON•OFF button. Your DVD System should turn off.
6. If the DVD System responds, no further programming is required.
   Note: If your DVD does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method below.
7. Enter your code here for easy reference.

Programming for DBS System:

Most RCA, GE and ProScan Satellite systems will not require programming. Check to see if your DBS Satellite System r