Operating the Terk HDMI-31 Smart Selector

Using the Terk HDMI-31 Smart Selector

The Terk HDMI-31 has both a manual and automatic (Smart) mode.

Automatic Mode: 
To use the automatic mode press the button labeled "AUTO/MAN" on the top of the Terk HDMI-31. The blue LED will light indicating that you are in automatic mode

• When in the automatic mode the Terk HDMI-31 will automatically switch to an input when a video signal is present. For example if your DVD play is connected to input 1, when you turn on the DVD play the HDMI-31 will automatically switch to input one and the blue LED labeled "1" will light. If you now turn on a component that is connected to either input 2 or 3 the HDMI will switch to that input and the LED will light accordingly. Your HDMI-31 always switches to the last product turned on when in the Automatic Mode.

Manual Mode:
To use the Terk HDMI-31 in manual mode press the button labeled "AUTO/MAN" until the LED labeled "AUTO" is not lit. Then press the button labeled "SELECT" to switch to the desired input. The LED will indicate which input is active.