RF Programmable Features for PRO9842B Remote Security System

RF Programmable Features for PRO9842A Remote Security  System

 

What are the RF Programmable Features to the PRO9842A Remote Security System?

The transmitters supplied with the unit are pre-programmed at the factory to provide the following functions:

• Button 1, pressed and released quickly = Arm/Disarm w/ Siren Chirps
• Button 1, pressed for ~ 1 second = Arm/Disarm w/o Siren Chirps
• Button 1, pressed for ~ 2 seconds = Engage/Disengage Panic Mode
• Button 2, pressed for ~ 3 second = Channel 2 Output

 If you desire to have the transmitters operate differently from this factory configuration, please refer to the separate Transmitter Programming Guide that came with the system.

There are five Programmable Features for the unit. Study the list below, keeping in mind the features and their defaults and decide how best to program the unit for your particular installation.

RF Programmable Features
Feature	1 Chirp	2 Chirps	Default
First	Passive Arming	Active Arming	Passive Arming
Second	Ignition D/L On	Ignition D/L Off	Ignition D/L Off
Third	Ignition D/UL On	Ignition D/UL Off	Ignition D/UL Off
Fourth	Passive D/L	Active D/L	Active D/L
Fifth	Chirps On	Chirps Off	Chirps On

To Program these Selectable Features: 

Entering the program mode involves operating the ignition switch and the valet/program/override switch in a particular sequence.

• Upon entering the programming mode, the system is immediately set to allow adjustment of the First Programming Feature. That feature, can then be set on or off by pressing button 1 of the transmitter. The system confirms that it is set to adjust the first feature by repeatedly flashing the LED once, with a pause in between each flash. The system will then report how the feature has been set by the number of chirps heard after pressing the transmitter button.
• Toggling the valet/program/override switch once again will advance you to the second programmable feature, confirmed by a repeating two LED flashes, with a pause in between each flash, etc., etc.

Notes:

• When you first enter the programming mode, you are automatically positioned to adjust the first programmable feature, and that the valet/program/override switch allows you to toggle from there through each of the four more programmable features. However, it will not allow you to return to any feature once you have toggled past it. Should you accidentally toggle past the feature you wanted to program, you must exit and re-enter the programming mode and then adjust the feature you missed.
• You can toggle past as many programmable features as you wish without having to adjust them. Each time you toggle forward to a new feature, the siren will chirp the appropriate number of times (1 or 2 times) to indicate how that feature is currently set, and the LED will flash the appropriate number of times to indicate the number of the feature (First through Fifth) that you are set to adjust.

Please follow the programming procedure carefully, and refer to the list of the Programmable Features above when programming the unit.

Feature:	Action:	Response:	LED Pattern:
	Turn Ignition On	No response
	Turn the valet switch on then off 3 times	1 Chirp, LED 1 flash
	Within 3 seconds, turn ignition off	Short Chirp, then long chirp
First	Then On	1 chirp	1 flash, pause
	Press Transmitter lock button to change	2 chirps
	or
Second	Turn the Valet Switch on then off	1 chirp	2 flashes, pause
	Press Transmitter lock button to change	2 chirps
	or
Third	Turn the Valet Switch on then off	1 chirp	3 flashes, pause
	Press Transmitter lock button to change	2 chirps
	or
Fourth	Turn the Valet Switch on then off	1 chirps	4 flashes, pause
	Press Transmitter lock button to change	2 chirps
	or
Fifth	Turn the Valet Switch on then off	1 chirp	5 flashes, pause
	Press Transmitter lock button to change	2 chirps
	or
	Turn ignition key off	Exit program mode

Note: Once you enter the feature programming mode, do not allow more than 15 seconds to pass between steps, or the programming mode will be terminated.

Thank you for your inquiry - Audiovox values our customers and though this product is no longer in production nor does it qualifiy for warranty or repair due to the age of the product, limited support information may be available through our FAQ Database and/or Customer Service.

Before you proceed check this and other answers related to your product by searching with the Model Number of your product from the Search Box above.

NOTE: Technical support, parts, user manuals (not shown on this FAQ), accessories, or repairs are either limited or NOT available for discontinued models.