Firmware Update on the RCA TH1702, TC1702 mp3 player

Typically, when a new version of firmware is available, the RCA easyRip software will inform you when you connect your device to the PC. This video (flash) tutorial will walk you through the simple steps of updating your players firmware using the RCA easyRip™ Media Software. 

Click Here to view the video tutorial. 

!Tip: You will need to disable any pop-up blockers.

To manually update the firmware on your TH1702, TC1702 mp3 player, you will need to:

1. Connect your device prior to installation.
2. Click Here to be redirected to the RCA Downloads Page.
3. Click on the Firmware Update/Restore Utility link.
4. Select "Save" and select the appropriate folder to save the installer.
5. Run the downloaded installer and follow the instructions to complete installation.

If your PC does not recognize the player, please try the following steps:

• Make sure your computer's operating system is up to date with the latest Service Packs and patches.
• Reboot the PC.
• Plug the player into a different USB port. Avoid the use of USB hubs if possible. Avoid Laptop docking cradles if possible.
• Connect the player to the PC while holding the play/pause button.

These steps should allow the player to be read by the USB port correctly and will show the player in "My Computer" as a new drive letter.