Troubleshooting the Advent ADVEXL10 10.1" Hi-Def digital monitor w/built-in DVD player

Troubleshooting the Advent ADVEXL10 10.1" Hi-Def digital monitor w/built-in DVD player

Problem:
IR remote is inoperative. 

Solution:
• Verify that the batteries in the remote are fresh.
• Verify that the remote sensor eye is not obstructed.
• If the monitor is set to M1, press the M1 button on the remote control. If the monitor
is set to M2, press the M2 button on the remote control. (See page 8.)

Problem:
Disc won't play.

Solution:
• Insert a disc with the label side facing upwards.
• Check the type of disc you put into disc tray. This DVD only plays DVD, audio CD and MP3. Blu-ray (BD) discs will not play in this player.
• Both the unit and the disc are coded by region. If the regional codes don’t match, the disc can’t be played.

Problem:
Play starts, but then stops immediately.

Solution:
• The disc is dirty. Clean it.
• The disc is damaged. Try another disc.
• Condensation has formed. Allow player to dry out.

Problem:
No sound or distorted sound.

Solution:
• Make sure the DVD is connected properly. Make sure all cables are securely inserted into the appropriate jacks.
• If the 2-channel IR headphones are being used, turn on the IR headphone power, and make sure the correct channel (A-B) is selected.
• Make sure the FM Modulator is ON and the proper Frequency has been selected.
• Make sure that unit is set to M1 when using Single Channel Headphones

Problem:
Can’t advance through a movie.
Solution:
• You can’t advance through the opening credits and warning information that appears at the beginning of a movie because the disc is programmed to prohibit that action.

Problem:
() Not allowed at the moment.

Solution:
The feature or action cannot be completed at this time because:
1. The disc’s software restricts it.
2. The disc’s software doesn’t support the feature (for example, angles).
3. The feature is not available at the moment.
4. The requested title or chapter number is out of the range.

Problem:
Picture is distorted.
Solution:
• The disc might be damaged, try another disc.
• It is normal for some distortion to appear during forward or reverse scan.

Problem:
No forward or reverse scan.
Solution:
• Some discs have sections that prohibit rapid scanning or title and chapter skip.
• If you try to skip through the warning information and credits at the beginning of a movie, you won’t be able to. This part of the movie is often programmed to prohibit skipping through it.

Problem:
HDMI/MHL input not working for the HDMI/MHL enabled device.
Solution:
• May require a special HDMI/MHL adapter. Contact your HDMI/MHL device supplier for the adapter.

Problem:
Game source does not work
Solution:
• The Game source can not be selected (grayed out) if the MVGP1 Game Module is not installed. Make sure the MVGP1 Game Module is installed and plugged in.

Problem:
DTV source does not work
Solution:
• The DTV source can not be selected(grayed out) if the DTV Module is not installed. Make sure the DTV is installed and plugged in.

Problem:
AV source does not work
Solution:
• The AV source cannot be selected (grayed out). The DTV module is installed. This input is shared with DTV input.

Remote Control Part Number 136-5326