Setup and Connection of the Audiovox FPE4707HR Television

Proper Setup of the Audiovox FPE4707HR Television

Identification of Controls

1. Speaker output jacks
2. HDMI/DVI inputs 1/2: To connect with those equipments with HDMI or DVI interface, for example, Set-top box or DVD player. (A HDMI-to-DVI adapter cable is required when you are connecting a DVI-equipped device to this TV.)
3. VGA interface/Audio in: Connect with those equipments with VGA interface, for example, PC Connect the audio jack as well with audio cable.
4. Component inputs 1/2: Connect to the audio and component output jacks of a DVD player ot Set-top box.
5. AV inputs 1/2: Receive video/audio signals from external sources such as VCR or DVD player.
6. AV output: Connect to the VCR input jacks to record programs.
7. Headphone jack
8. S/PDIF digital out terminal (optical)
9. USB Port: For software update only. The user cannot operate the unit through the USB port.
10. RS-232 control interface: For service only. The user should not use this interface.
11. AIR antenna input: Connect to outdoor antenna.
12. CABLE input: Connect to a cable TV system.

Power Connection

Connect the AC plug to the wall outlet.

Note: This product should be operated only from the type of power source indicated on the marking label. Always unplug the AC cord from power outlet when not using for a long period of time.

Speaker Connection

Connect the speaker audio cable to the external speaker output jack on the unit matching the "+" and "-" ends of the cable.

Note: Unplug the TV set and all connected components before connecting the speakers.

Connect an Audio Processor or Hi-Fi (Digital Audio)

For a full Home Theater sound experience, you must connect your Hi-Fi or Audio processor the S/PDIF OUT (Optical) terminal on the TV rear.

Note: The S/PDIF OUT terminal only can output digital TV program's audio.

Connect a VCR

How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.

Note: For better video, you can use the S-VIDEO terminal if your source supports it. S-VIDEO input uses the same circuit as Video 1. S-VIDEO has priority if both connectors are inserted. Use one or the other.

To play VCR: Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use UP, DOWN to select AV1/SVIDEO and then press OK to confirm. Turn on your VCR, insert a videotape and press the Play button.

Connect a Camcorder

How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder.

To playback Camcorder: Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use UP, DOWN to select AV2 and then press OK to confirm. Turn on your camcorder and set it to output mode. (For details, refer to your camcorder user manual.) Insert the tape into the camcorder and press Play button.

Note: The operations of the camcorder may be different and is dependant on your model. Please read the user manual of your camcorder to confirm operation.

HDMI Connection

How to connect a DVD Player (or STB) using HDMI Connection: Connect the HDMI cable between the HDMI interface on the unit and HDMI output on the DVD player (or STB).

To playback DVD (or STB): Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use UP, DOWN to select HDMI1 (or select HDMI2 if HDMI2 interface is used) and then press OK to confirm. Turn on your DVD player or STB and do relative operations.

Note: If the external device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI terminal. Connect the audio cable to the AUDIO terminal of VGA IN on the TV rear.

Connect a DVD player or Set-Top Box

How to connect: Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Y, Pb, PR output jacks on the DVD (or STB). Componenet color inputs provide luminance and separate color signal. Connect the Audio cable between the AUDIO input jack on the unit and AUDIO output jacks on the DVD (or STB).

To playback DVD or STB: Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use UP, DOWN to select Component1 (or select Component2 if COMPONENT2 input terminals are used) and then press OK to confirm. Turn on your DVD or STB and do relative operations.

Connect a PC

How to connect: Connect a VGA cable between the VGA(D-sub) interface on the PC and the VGA input interface on the unit. Connect an Audio cable between the AUDIO output on the PC and the AUDIO input jack on the unit.

To watch the PC screen: Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use UP, DOWN to select Analog RGB and then press OK to confirm. Turn on your PC and check for PC system requirements. Adjust the PC screen.

Connect a VCR (for recording) or external amplifier

How to connect: Connect the Audio/Video cables between the Audio (L/R)/VIdeo jacks on the unit and VCR. Connect the Audio cables between the Audio (L/R) jacks on the unit and external amplifier.

To record program: Turn on your TV, select a program you wish to record. Turn on your VCR, insert a videotape for recording. Press the Record button to begin recording.

Note: Only analog TV programs, AV1 and AV2 input sources can be output through the AV output jacks.