Troubleshooting the AR AWSBTSK Portable Bluetooth Wireless Speaker

Troubleshooting the AR AWSBTSK Wireless Speaker
The following troubleshooting guide takes you through some of the more common problems associated with the installation and/or operation of a wireless system.
Issue:	Cause and solution:
Why isn't there any sound coming from the AWSBTSK?	Check that the AC power adapter is fully inserted into the wall outlet and the power cord from the AC adapter is firmly connected to the speaker’s power input jack. If you're using batteries for the speaker, check that they are fresh and inserted with correct polarity (+, –). Make sure the batteries are fresh and replace if necessary. Confirm that the speaker is turned on. Check that the audio source component (stereo, MP3 player, etc.) is turned on and transmitting sound as it normally should. Make sure the volume on your audio source is turned up. Check that the speaker volume is turned up. Move the Bluetooth device and the speaker closer together. The Bluetooth wireless technology generally can operate within a range of 35 feet. However results may vary based on other factors such as room layout, wall material, weather conditions, etc. Make sure you have switched to the speaker’s Bluetooth connection when streaming audio with Bluetooth. Make sure you entered the correct passkey when pairing your device.
Why can't I pair the AWSBTSK with my Bluetooth device?	Make sure the Bluetooth capability of your device is turned on and discoverable. Move the Bluetooth device and the speaker closer together. The Bluetooth wireless technology generally can operate within a range of 35 feet. However results may vary based on other factors such as room layout, wall material, weather conditions, etc. Make sure your device supports audio transfer. Turn off all other nearby Bluetooth devices or disable their Bluetooth functionality. Bluetooth Reset: Press and Hold the Pair Button for 12 seconds. (Fast double beep on reset). This resets the Bluetooth module in the speaker.