Information, Programming Guide and Support for the Code Alarm CATX50 Remote Transmitter

Programming the Code Alarm CATX50 Transmitter

CATX50 Programming Guide

To Program the CATX50 Transmitter:

1. Enter the vehicle, and turn the ignition switch to the ON position.
2. Press and release the Programming button switch 3 times.
3. Press and hold the LOCK button of the transmitter you wish to program.
4. The lights will flash 1 time, indicating that the system is accepting the programming of channel #1 which
   is lock. Repeat step 3 for each transmitter you wish to program.
5. Press and release the valet push button switch 1 time to advance to channel 2.
6. Press and hold the UNLOCK button of the transmitter you wish to program.
7. The lights will flash 1 time, indicating that the system is accepting the programming of channel #2 which
   is unlock. Repeat step 6 for each transmitter you wish to program.
8. Press and release the valet push button switch 1 time to advance to channel 3.
9. Press and hold the TRUNK button of the transmitter you wish to program.
10. The lights will flash 1 time, indicating that the system is accepting the programming of channel #3 which
    is trunk. Repeat step 9 for each transmitter you wish to program.
11. Press and release the valet push button switch 1 time to advance to channel 4.
12. Press and hold the STAR button of the transmitter you wish to program.
13. The lights will flash 1 time, indicating that the system is accepting the programming of channel #4 which
    is remote start. Repeat step 12 for each transmitter you wish to program.