Operating the Audiovox Movies2Go MMDV7OC Overhead System
Turning the Unit On or Off:
Picture Adjustment: When watching the program, the quality of the picture can be adjusted to suit your taste.
Source Select: There are 2 inputs to select from the SOURCE Select Menu: AV1 and AV2. The built in DVD player is source “AV1”.
Exit the Menu: To exit the main menu, highlight DISPLAY OFF and press MENU button to enter, the menu will disappear. The menu also disappears from the screen automatically if you do not press any button within a few seconds.
Wireless Headphones: The unit includes a built-in infrared transmitter and two pairs of Audiovox wireless headphones (Part Number MMIRHS). The volume can be adjusted with volume control on each headset. The wireless headphones must be used within line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line.
AV 2*: The second video input may be connected to a VCP player, video game system, or other audio / video input. To play the Video 2 source, turn the unit ON and press the Menu button on the unit to select INPUT SELECT and press the UP/DOWN button until “AV2” is displayed on the screen.Turn the source component on with its power button or remote control. The unit is now ready to play the audio and video signals from the source connected to the video 2 input.
To get the optimum use out of the DVD section, make sure you read this section completely.
Regional Coding: Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If the codes don't match, the disc won't play. This unit’s code is region 1. Other regional codes cannot be played in this unit. The unit will display “WRONG REGION.”
Types of Discs the Unit will Play:
Types of Discs that CANNOT be used with this unit:
Loading and Playing Discs: Before you load a disc, make sure that it is compatible with the player. When you press the Power button the unit will turn on and display the source selected. Select DVD mode (AV1 mode) and insert the disc (Label Up) into the disc compartment. When the disc is half way in it will be automatically pulled in and play will begin.
Settings and Adjustments
This chapter describes how to set and how to adjust using the on-screen SETUP menu.
Using the Setup Menu: Using the setup display, you can do the initial setup and set the various outputs. You can also set a language for the on-screen display and the setup display and limit playback by children.
To Cancel Using the Setup Display: Press the SETUP button on the remote.
Settings for Display: Press the SETUP button and select Display. The DISPLAY SETUP allows you to adjust screen setting (aspect ratio) Press and then use the (Up, Down) buttons to select the appropriate settings.
Setting the Language for On-Screen Display: Press the SETUP button and using the (Up, Down) buttons select “OSD LANGUAGE”.
OSD (On-Screen Display) Language Menu: The OSD Language Menu allows the user to select the language for the onscreen display. Press and then use the (Up, Down) buttons to select the desired language. The user can select either English, French or Spanish for the OSD language.
Defaults Settings: Press the SETUP button and select Defaults. The DEFAULTS SETUP allows you to reset ALL options to factory defaults. Press the Right cursor button and then press Enter to implement the reset.
Settings for Parental (Parental Control): This section of the SETUP Menu allows user to control the content of movie playback from G to ADULT. The Parental Control function allows you to limit viewing to your preference.
Settings for Password (Parental Control Password): Press the SETUP button and select PASSWORD. The PASSWORD SETUP allows you to change the parental control password. Press and then press Enter.
Playing Audio CDs
When playing an audio CD, the DISPLAY Banner appears automatically. It displays the current track and the amount of the time for that track playing. Press the DISPLAY button on the remote to change the DISPLAY Banner. The options below show you what happens when you press the DISPLAY button.
Using the REPEAT Feature: The default mode for the Repeat feature is OFF. As you toggle through the options, the repeat option changes at that time. The selected repeat option loops repeatedly until you turn it off. Pressing REPEAT consecutively changes the repeat options:
Playing MP3 Discs
MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CDR discs that have been encoded in MP3 format can be played on your DVD player. Press the DISPLAY button on the remote to DISPLAY Banner. The options below show you what happens when you press the DISPLAY button.
Selecting Folders and Songs: When an MP3 disc is inserted in the player, the screen appears automatically. You can change folders and songs through the menu. The DVD player plays the songs in order they were burned on to the disc.
Skipping Songs: Use the Next button on the remote control to move to the next song. Use the Previous button to move to the beginning of the currently playing song. Press the Previous button again to move to the previous song.
Using The Repeat Feature: The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options:
Thank you for your inquiry - Audiovox values our customers and though this product is no longer in production nor does it qualifiy for warranty or repair due to the age of the product, limited support information may be available through our FAQ Database and/or Customer Service.
Before you proceed check this and other answers related to your product by searching with the Model Number of your product from the Search Box above.
NOTE: Technical support, parts, user manuals (not shown on this FAQ), accessories, or repairs are either limited or NOT available for discontinued models