Information, Programming Guide and Support for the Code Alarm CATX4 Transmitter

Programming the Code Alarm CATX4 Transmitter
	CATX4 Programming Guide
	Required Battery: CR2032
	Compatible With: ,  ,  ,    ,    ,  ,
To program transmitters: Note: This mode will only retain the last 4 remote transmitters programmed. If the transmitter memory is exceeded, the security system will start deleting transmitters from memory in chronological order. Turn the ignition ON. Press and hold the valet/override button. Within 10 seconds the system will chirp/flash the parking lights (3) three times, release the button. Press Button 1 of each transmitter you wish to program. The system will respond with 1 chirp for each accepted transmitter (up to 4). Turn the Ignition OFF to exit programming. The system will also exit programming after 15 seconds of inactivity. Note: This system has 1 button programming which programs all channels of the system.

NOTE: This transmitter works with multiple Alarm and Keyless Entry systems please make sure you use the ACTUAL model number of your alarm system in the ASK A QUESTION page unless you question is related to the transmitter itself.

HINT: Click the ANSWERS tab at the top of the page and search using CATX4, you will see a list of all the Alarms and Keyless Entry Systems that use this transmitter.