Remote Operation for the Code Alarm CA1550 Security and Keyless Entry System

Remote Operation for the Code Alarm CA1550 Security and Keyless Entry System 

Using Your Remote Control

Arming the Security System: To arm the system, exit the vehicle, close all doors, then press the Lock button. The parking lights will flash 2 times, indicating the system is armed, has locked the doors (if equipped and connected) and activated the starter disable feature. The LED status indicator will blink steadily, once per second.

NOTE: The system is defaulted with Silent Choice enabled, which requires a second press of the Lock button to activate an audible arming response from the vehicle.

Passive Arming Bypass: If passive arming is enabled on your system, while the system is disarmed, press Lock + Alarm, the system will respond with 1 chirp and the LED will turn on. The security system will remain in this temporally bypassed state for as long as you wish. To exit passive bypass, press the Lock or Unlock button and the system will return to normal status.

Bypassing The Shock Sensor: To arm the system and ignore the shock sensor press Lock button, then within 5 seconds press Lock + Alarm, the system will respond with 1 long chirp.

NOTE: The system will only change the shock sensor setting for one arm cycle and will be defaulted back to normal operation the next time the system is armed.

Hidden Alarm Function: Press the Alarm button first, within 3 seconds press the Lock button to activate the hidden alarm function. The security system will arm with “Hidden Alarm Function” in which the siren / horn will be silenced if the system is triggered.

Disarming the Security System: To disarm the system press the Unlock button. The parking lights will flash 1 time, indicating the system is disarmed and has unlocked the doors (if equipped and connected).

NOTE: The system is defaulted with Silent Choice enabled, which requires a second press of the Unlock button to activate an audible arming response from the vehicle.

Two Stage Door Unlock (Optional): If this feature is enabled on your system, pressing the Unlock button one time will unlock only the driver’s door. Press Unlock again within 5 seconds to unlock the remaining doors.

Valet Mode:

To engage valet mode:

1. Turn the ignition key to the ON position.
2. Press and hold the emergency override button.
3. The LED will light solid indicating that the system is in valet mode.

When valet mode is activated the status LED will light solid, and all security and remote start functions will be disabled.

To disengage valet Mode:

1. Turn the ignition key to the ON position.
2. Press and release the emergency override button.
<li