Articles in this section

See more

System Connections for the Audiovox FPE1506DV Television with DVD Player

Avatar
CS
Updated
Follow

 

System Connections for the Audiovox FPE1506DV Television

Do not connect the power cord until all other connections have been made.

Ensure that you observe the color cord when connecting audio and video cables.

Connecting to External AV Signal Source

Use the audio and video cable to connect the AV input jacks on the rear panel of the unit to the external AV signal source.

Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear panel of the unit to the external AV signal source.

After connection, turn on the power of the unit and the external AV signal source and then press the SOURCE button to shift to CVBS or S-VIDEO mode.

Note: the L/R audio input jacks can be used in the both CVBS and S-VIDEO modes.

Image

Connecting to External AV Signal Source YPbPr

Use the audio and video cables to connect the Y/Pb/Pr input Jacks on the rear panel of the unit to the external AV signal source.

After connection, turn on the power of the unit and external AV signal source and then press the SOURCE button to shift to Component mode.

Image

Connecting to External AV Device AV Out

The unit supports AV signal output, it can be connected to the external audio and video devices.

Use the audio and video cables to connect the AV output jacks on the rear panel of the unit to the external AV device.

Image

Connecting to PC

The unit can be connected to PC (person computer) via the VGA cable. Follow the steps and the figure below to connect:

  1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit.
  2. Connect the other end to the PC.
  3. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit.
  4. Connect the other end to the PC audio output jack.
  5. Please set the PC’s resolution at 1024x768@60Hz.

After connection, turn on the unit and the PC and then press the SOURCE button to shift to VGA mode.

Image

Connecting to Earphones

This unit can be connected to an earphone for listening to music privately.

Image

After connecting to the earphone, the internal speakers output will turn off automatically.

Connecting to Power Supply

Plug the power supply cord to the AC100~240V wall outlet.

<img border="0" alt="Image" sr

Comments

0 comments

Article is closed for comments.