Remote Operation for the Code Alarm CA440SS Remote Start System

Remote Operation for the Code Alarm CA440SS Remote Start System 

Remote Starting the Vehicle

The system WILL NOT start the vehicle if any one of the following situations exist:

• The vehicle's hood is opened.
• The gear shift selector is not in Park. 
• The brake pedal is depressed.

To Start the Vehicle:

1. Press and release the transmitter button 2 times within 2 seconds. The vehicle will start and remain running for the preprogrammed 5, 10, 15, 20 minute run cycle. As a visual indication, the parking lights will flash or remain on depending on the setting by your installation center.
2. When you arrive at the vehicle, turn the ignition key to the ON position (Do not try to restart the vehicle), then step on the brake pedal to disengage the remote start. The vehicle will continue to run, but now on it's own power.

Shutting Down the Remote Start: To shut down the remote start feature form the transmitter press and release the transmitter button 2 times within 2 seconds.

Valet Mode: Valet Mode is used to disable the system from remote starting. To enter or exit valet mode simply follow the 4 steps outlined below:

1. Push and hold the programming/valet button.
2. Cycle the ignition ON/OFF, ON/OFF, ON/OFF.
3. Release the programming/valet button.

Transmitter Programming

If the need arises for programming of additional or replacement transmitters, simply follow the 4 steps outlined below:

1. Turn the ignition to the ON position.
2. Press and release the programming button 3 times.
3. Press and hold the button of the transmitter you wish to add for 3 seconds. The parking lights will flash indicating the transmitter has been learned.
4. Repeat step 3 for each transmitter up to a total of 4.

For more information, please refer to your Owner's Manual or Installation Manual.

---

STILL NEED HELP?- We use an automated support system so we can serve our customers in a first in - first out manner and prevent long hold times on the telephone systems

---

FIRST

• Feel free to search the knowledge base by entering your model number or keyword in the search box on the Support Home Page or on the Answer Page , then push the red search button to find additional answers available as this answer may be only one of the many available answers in our system for your product.

NOTE: Search for a MODEL NUMBER, searching for words like purchase or, warranty will get you far to many results and make finding the answer you are looking much more difficult

REACHING CUSTOMER CARE

If searching the answers in our Knowledgebase did not answer your question and you need additional information, support, warranty service or want to inquire about out of warranty repair please follow one of the steps below to use the automated support system

1. New to the Support Site :
Click here to go to the Support Account Creation Page so you can submit a support request and we can respond.

2 . Returning Customer:
Click Here to Go to the Ask A Question Page so you can submit a support request and we can respond. Note: You may have to login if you haven't already.