Operating the Audiovox VOD1048 Overhead System

Operating the Audiovox VOD1048 Overhead DVD Player

DVD Operation

Playing a Disc:

1. Press the DVD button on your remote control and insert the disc it will automatically begin playback.
2. If you have stopped a disc that was playing, you can restart a disc by pressing the Play/Pause button on the faceplate or your remote control.

Pausing a Disc: To pause a disc that is playing, press the Play/Pause button.

Stopping a Disc:

1. To stop a disc that is playing, press the Stop button on your remote control.
2. The disc can be restarted in the same place by pressing the Play/Pause button.

Selecting a Chapter Using the DVD Menu: Most DVDs contain menu that, among other options allows you to select a specific chapter to play. To use the DVD menu to select a chapter to play, follow the stops below:

1. Press the Menu button on either the remote control or the front panel. The DVD menu is displayed.
2. Use the direction arrows to highlight the chapters option in the menu and press SELECT.
3. Use the direction arrows to highlight the chapter that you want to play and press SELECT. The menu is closed and the chapter is immediately played.

Playing from a Specific Time in a Title or Track: This feature is available for audio discs and other discs that support the ability to move to a specific time in a track or title. For example, if a track is 5 minutes and 38 seconds long you can select to start playing from 5 minutes and 8 seconds so that you only listen to the last 30 seconds of the track.

1. Press the DISPLAY button on your remote control until the Time option is displayed in the top left corner of the screen (CD) or the Main Menu screen is displayed (DVD).
2. Use the number buttons on your remote control to enter the time that you want to move to in the format: mm:ss.
3. When you have finished entering the time, the Time option is closed and the track or title is played from the time entered.

Playing a Specific Track or Chapter and Title:

1. Press the DISPLAY button on your remote control until either the Track or Title and Chapter option is displayed or the Main Menu screen is displayed.
2. Use the cursor button to highlight "Chapter" and then press the Enter button.
3. Use the number buttons on your remote control to enter the track or title and chapter that you want to play and then press Enter.

Skipping Through the Chapters or Tracks: As you are playing a disc you can skip to the next or to a previous chapter (on a DVD) or track (on a audio disc). This is carried out using the Next and Previous buttons as follows:

• To skip to the beginning of the next chapter or track, press the Next button.
• To skip to the beginning of the current chapter or track, press the Previous button.
• To skip to the beginning of the previous chapter or track, press the Previous button twice.

Using the Repeat Features: The repeat feature allows you to repeat a section of a disc once it has finished playing. The following items can be repeated:

• The entire disc
• A single track
• A single chapter
• A single title
• A section of the disc between two selected points

Repeating a Track, Chapter, or Title:

1. Play the track, chapter, or title that you want to repeat.
2. Press the REPEAT MODE button on your remote control until the required repeat mode is displayed in the top left corner of the screen. This can be Repeat Track, Repeat Chapter, or Repeat Title. When the disc reaches the end of the selected track, chapter, or title, it will start playing it again.
3. To stop track repeat, press the REPEAT MODE button again until Repeat Off is displayed in the top left corner of the screen.

Repeating a Section of any Disc:

1. Press A > B once to start selection to select the starting point A.
2. Press A > B again to finish selection to select the ending point B.
3. To cancel selection press A > B again.

Playing a Disc at Different Speeds:

1. You may play a disc at different speeds in both forward and reverse directions.
2. To play the disc at different speeds in a forward direction use the Forward scan button on your remote control. The speeds that can be achieved are: X2, X4, X8, X16 and X32 for DVDs and video CDs. X2, X4, X8, X16 and X32 for audio discs and MP3s. The audio can be heard at all speeds.To play the disc at different speeds in reverse use the Reverse scan button on your remote control. The speeds that can be achieved in reverse are: X2, X4, X8, X16, X32.

Changing Main Menu with Display Key:

1. To display the Main Menu for the disc that is playing, press DISPLAY on your remote control.
2. The Main Menu is available to change the way the disc is playing.
3. Select the options by highlighting the desired option using the cursor buttons then press the Select/Enter button.

Using the Setup Menu

Once the initial settings have been completed, the player can always operate under the same conditions whenever the power is switched on. These settings are called SETUP data that are easily modified and stored using the SETUP menu. The SETUP menu includes the information for GENERAL, AUDIO, VIDEO, PREFERENCES and PASSWORD controls.

1. Press the STOP button twice, if the disc is being played.
2. To display the SETUP menu, press the SETUP button.
3. Use the Cursor buttons to highlight the desired item.
4. Press enter to select the highlighted item.
5. To exit the SETUP menu, press the SETUP button again.

GENERAL SETUP:

• TV DISPLAY You can select the aspect ratio according to your TV. If the TV on which the movie is played is 16:9 "WIDE". If it is 4:3 type, choose NORMAL/PS (Pan & Scan) or NORMAL/LB (Letter Box).
• ANGLE MARK You can set up so that the angle mark appears on scenes that contain angle options.
• OSD LANGUAGE …You can select an OSD language such as English, French, Spanish, etc.
• CAPTIONS … Adjust caption options.
• SCREEN SAVER … Adjust Screen Saver options.
• LAST MEMORY … Adjust Last Memory selections

AUDIO SETUP:

• SPEAKER… You can select various speaker settings.
• DOLBY DIGITAL… Choose Stereo or Mono mode and adjust Dynamic range.
• EQUALIZER … Choose the desired preset equalizer mode.
• 3D PROCESSING …Use this option to make a reverb effect if you prefer.
• HDCD… Adjust the desired Filter frequency.

VIDEO SETUP:

• Quality… Adjust Video quality controls such as Sharpness, Brightness, Contrast, Gamma, Hue and Saturation etc.

PREFERENCE SETUP: You can select a preference Setup such as:

• TV Type: You can select TV Type (PAL, MULTI, NTSC)
• PBC: You can select PBC ON and OFF.
• AUDIO: Choose the desired language.
• SUBTITLE: Choose the desired language.
• DISC MENU: Choose the desired language.
• PARENTAL Setting: You can select the rating level.
• DEFAULT Reset: Setup Menu can be reset to DEFAULT Value.

PASSWORD SETUP:

1. Select the Password option.
2. Enter your old password and press enter. Enter a new password and press Enter.
3. Re-enter your new password to confirm then press the ENTER button.

Note: The Default Password is 3308. This pas sword is always effective even after you have selected your own password and changed it. To avoid the possibility of others using the default password to set the parental level and change the pas sword, you can record this default password in another area and delete it from this manual. Some discs can be limited depending on the age of users while some discs cannot.

Sound and Picture Setup

Adjusting the sound settings: The sound settings can be adjusted to suit your personal preference: TREBLE, BASS, BALANCE.

1. Press the MENU button. The PICTURE menu is displayed.
2. Use the (7) or (9) button to move to the SOUND menu.
3. Use the (8) or 10) button to select one of the following options: TREBLE, BASS, BALANCE.
4. Press the SEL (11) button.
5. Press the (7) or (9) button to adjust the setting to suit your personal preference.
6. Press the MENU button repeatedly until the menu disappears.

CONTRAST, BRIGHTNESS, SHARPNESS, COLOR, TINT:

1. Press the MENU button. The PICTURE menu is displayed.
2. Press the SEL button.
3. Adjusting the picture settings: Use the (8) or (10) button to select one of the following options: CONTRAST, BRIGHTNESS, SHARPNESS, COLOR, TINT.
4. Press the (7) or (9) button to adjust the setting to your personal preference.
5. Press the MENU button repeatedly until the menu disappears.