XM Activation for the Audiovox Xpress Plug-and-Play XMCK10A XM Satellite Radio Receiver
Activating your XMCK10A radio service is easy. You have one of two choices to activate your service: Online or by Phone.
Online Activation Process:
- First, please make sure the Xpress XMCK10A unit is working properly by tuning to the XMCK10A Preview channel (#1). If you can hear XMCK10A Preview, your equipment is ready. Note: The antenna must be installed on the outside of your vehicle for best performance.
- Next, make sure you have a credit card and your XMCK10A Radio Hardware ID handy. You can display your ID by tuning your XMCK10A Radio to channel ‘0’, one down from XMCK10A Preview (For tuning instructions see the Receiver Control Features section of this guide.)
- To obtain the XMCK10A identification (ID) number, tune to channel 0 and press the Rotary/Select Knob. The 8-character alphanumeric XMCK10A ID will appear on the screen. Please check your 8-character alphanumeric XMCK10A ID code carefully. There is no “I” (eye), “o” (oh), “S” or “F” used. You may wish to double-check your ID code on the outside of your tuner box. Write down the 8-digit alphanumeric ID for future reference. Note: No adjustments are allowed in this mode. To exit the Radio ID screen, tune to any channel by turning the rotary knob and press.
- Once the ID code is obtained, log on to XMCK10A at http://activate.xmradio.com and follow the easy instructions to activate your Xpress XMCK10A unit.
Call-in Activation Process: Call XMCK10A at 1-800-XM RADIO (1-800-967-2346). One of XMCK10A’s friendly Customer Care representatives will take the necessary information and walk you through the activation process. After the activation form is submitted you should keep your receiver ON for at least 1 hour. This will complete the activation process. When the Xpress XMCK10A unit is activated, you will be able to access over 150 digital radio channels.
For more information, please refer to your Owner's Manual.