Menu, Icons and Features for the Code Alarm CA670 Remote Start Security System

Additional Features for the Code Alarm CA670 Remote Start Security System
Additional LCD Remote Control Functions
Display Illumination	Press and release the “F” button on the LCD remote control one time. The display will illuminate for 10 seconds.
Vibrate or Tones	Press an release the “F” button and the UNLOCK icon button on the LCD remote control simultaneously one time to toggle between beep tones and vibrate mode. The LCD remote control will either beep or vibrate to indicate which mode is selected.
Page Call Out	From within the vehicle, press and hold the emergency override button for 4 seconds, the LCD remote control will emit a beep tone to indicate that someone is calling you to the vehicle.
Countdown Timer	The Dot Matrix remote control is equipped with a countdown timer for situations where an alert tone may be needed to remind you of something important. The countdown timer allows you to set the timer up to 19 hours and 59 minutes. Refer to the Menu information below.
Parking Meter Timer	The Dot Matrix remote control is equipped with a parking meter timer that allows you to set a countdown timer for 10, 20, 30, 60, 90 or 120 minutes. The LCD remote control will emit a beep tone when the timer expires. Press ”F” and OPTION simultaneously to select desired time.
Alarm Clock	The Dot Matrix remote control is equipped with a built in alarm clock that can be set to beep at a certain time each day. The alarm clock must be set, and the feature turned on. Refer to the Menu information below.
Check Vehicle Status	Press the LOCK icon button, TRUNK icon button and OPTION button simultaneously for 1 second. The Dot Matrix remote control will display the system’s current status.
Check Temperature	Press the TRUNK icon button and OPTION button simultaneously for 1 second. The LCD remote control will display the vehicle’s interior temperature.
Optional Songbird Feature	The optional songbird feature (Code Alarm part # SB1 and labor required) allows you to program songs and tones to your system (i.e. Setting a different tone for Lock activation and unlock activation). Turning Songbird On: Press and release the TRUNK icon button on the remote control, then press and hold the LOCK icon button on the remote control within 2 seconds. The SB1 speaker will give notification that Songbird has be turned ON. Turning Songbird Off: Press and release the TRUNK icon button on the remote control, then press and hold the UNLOCK icon button on the remote control within 2 seconds. The SB1 speaker will give notification that Songbird has be turned OFF. Setting Songbird Tones: Press and release the TRUNK icon button on the remote control, then press the OPT button on the remote control within 2 seconds. Press the LOCK icon button on the remote control or UNLOCK icon button on the remote control to scroll through the different tones. While in this mode the TRUNK icon button on the remote control will change the length or version of the tone. Press the OPT button on the remote control to select the desired tone and exit programming. Please see your sales associate for details on Song Bird or any other Code Alarm accessory.
Replacing Remote Control Batteries	2-way LCD Remote Control: The AAA alkaline battery inside the 2-way LCD remote control should last approximately 1 year under normal use. When the batteries become weak you will notice the remote control range (the distance from the vehicle the remote control will work) deteriorate and the BATTERY icon on the LCD remote control will show. Slide the small release tab on the back of the remote control to the unlock position. Gently slide the battery cover off of the remote control. Remove the old AAA battery, observing the +/- symbols on the battery, and replace with a new AAA battery. Gently slide the battery cover on to the back of the remote control and lock the release tab in place. Test operation of the remote control. 1-Way Six Button Remote Control: The two (2) 3 volt lithium batteries (model CR2025) inside each remote control should last approximately 1 year under normal use. When the batteries become weak you will notice the remote control range (the distance from the vehicle the remote control will work) deteriorate and the small LED on the remote control will dim. To replace the remote control batteries: Using a small (#1) Phillips screwdriver, remove the screw on the back of the remote control. Gently unsnap the halves of the remote control apart. Slide the 2 lithium batteries out of the circuit board, observing the +/- symbols on the batteries and replace with new lithium 3 volt batteries (model CR2025). Gently snap the halves of the remote control back together and reinstall the Phillips screw on the back of the remote control. Test operation of the remote control.
LCD Remote Control Functions
LCD Remote Control Icons and Their Indications

For more information, please refer to your Owner's Manual.