Operating the Audiovox CCS-100 Electronic Cruise Control

Operating the Audiovox CCS-100 Electronic Cruise Control

• Be sure to fully test all functions of your new cruise control on a level surface away from pedestrian and vehicle traffic.
• While traveling 35 MPH turn switch on, then press Set button. Unit will engage when Set button is released. To disengage, tap on brake or turn switch off - cruise will disengage. Follow same procedure at 45 MPH and at 55 MPH
• If unit is inoperative, open cover on cruise and look at the LED. Press Set button, LED should light. Press Resume button, LED should light. Step on the brake, LED should light. If LED does not light then check wiring. If the vehicle’s speed drops considerably when traveling up hills, you may need the optional vacuum booster canister.

ON/OFF: Move the ON / OFF switch to the ON position. Nothing will happen, as this simply prepares the system for operation. Each time the ignition switch or the cruise control switch is turned OFF, the system is de - energized. To reenergize the system, the ignition switch must be turned on, and the cruise control switch must be moved to the ON position. The cruise control switch can be left On at all times without causing any damage to the system.

SET SPEED: After turning the system On, wait at least 3 seconds before attempting to set your speed. To operate the system, drive the car at a steady speed above 35 MPH Press the SET / COAST switch and release it, then slowly remove your foot from the accelerator pedal. Your SET SPEED is now programmed into the cruise control’s memory, and your driving speed should remain within 2 MPH of your set speed. If you want to increase your speed, simply press on the accelerator pedal. When you release the pedal, you will return to your original SET SPEED.

ACCEL: You can increase your SET SPEED using the RESUME / ACCEL feature. Your vehicle will accelerate as you hold this switch to the RESUME / ACCEL position. When you release the switch, your SET SPEED will be re - programmed to the present speed of the vehicle.

TAP UP: You can also increase your SET SPEED gradually by quickly pressing and releasing the RESUME/ ACCEL switch. Each time you press and release the switch, your speed will increase by approximately 1/2 MPH

TAP DOWN: You can also decrease your SET SPEED gradually by quickly pressing and releasing the SET/ COAST switch. Each time you press and release the switch, your speed will decrease by approximately 1/2 MPH

COAST: To reduce your SET SPEED, press and hold the SET / COAST button. This erases the previously programmed SET SPEED, and allows the vehicle to coast. Just before slowing to the speed you want, release the button. Your present speed will be re - programmed as the new SET SPEED, providing the vehicle is traveling faster than 35 MPH

RESUME: Whenever you use the brake pedal to slow or stop the vehicle, the cruise control will disengage but retain the programmed SET SPEED. To return to the SET SPEED, accelerate to a speed above 35 MPH, then press and release the RESUME / ACCEL switch. The vehicle will automatically accelerate to the programmed SET SPEED, and hold that speed. When using the RESUME feature with standard transmission, you should be in the correct gear for your SET SPEED.

DISENGAGE: You can disengage from the SET SPEED in two or three ways, depending on the type of transmission ( manual or automatic ) in the vehicle.

• Gently tap the brake pedal to activate the brake lights.
• Turn the control switch to the OFF position.
• For manual transmissions, depress the clutch. This will cause the engine to rev slightly before disengaging.

For more information, please refer to your Installation Manual.

Thank you for your inquiry - Audiovox values our customers and though this product is no longer in production nor does it qualifiy for warranty or repair due to the age of the product, limited support information may be available through our FAQ Database and/or Customer Service.

Before you proceed check this and other answers related to your product by searching with the Model Number of your product from the Search Box above.

NOTE: Technical support, parts, user manuals (not shown on this FAQ), accessories, or repairs are either limited or NOT available for discontinued models.