Operating the Code Alarm MM1 Remote Security and Keyless Entry System
|Arming the Security System||
If the system sounds 1 time and the parking lights flash only 1 time, this indicates that the vehicle’s interior light is on or an entrance is left open.
|Disarming the Security System||
Press the UNLOCK button. The system will flash the parking lights 1 time, and the doors will unlock (if equipped and connected).
|Two Stage Door Unlock (Optional)||
If this feature is enabled on your system, pressing the UNLOCK button one time on the remote control will unlock only the driver’s door. Press UNLOCK again to unlock the remaining doors.
|Disabling/Enabling Confirmation Chirps||This feature must be turned ON or OFF in system programming, see your installing dealer for details.|
|Using the Progressive Car Finder Feature||Press the CAR FIND/PANIC button on the remote control to locate your vehicle. The system will sound 5 times at low volume increasing in volume each of 3 times the button is pressed.|
|Using the Personal Protection Alarm (Panic)||Press and hold the CAR FIND/PANIC button on the remote control for 2 seconds to activate the personal protection alarm. The system will sound for 30 seconds. Pressing any button on the remote control will turn the personal protection alarm off.|
|Activating the Trunk Release Feature (Optional)||If this feature is enabled on your system, pressing and holding the UNLOCK button on the remote control for 2 seconds will open the vehicle’s trunk or hatch.|
|Using Valet Mode||
To engage valet mode:
To disengage valet mode:
|Automatic Convenience Options||
The MM1 Security System performs a variety of automatic functions to enhance security and comfort. Some of these features are programmable at the time of installation. Please see the installing dealer for details.
Automatic Arming: The MM1 Security System will arm automatically 1 minute after the ignition is turned off. This feature can be temporarily disabled by placing the system into Valet mode. (if option is selected).
Ignition Lock: If all doors are closed and the vehicle’s ignition is turned on, the doors will lock automatically.
Ignition Unlock: When the ignition is turned off, the doors will unlock automatically.
Silent Choice: When this feature is selected in programming, the system will arm and disarm without sounding the horn.
|When Your Security System is Triggered||
The MM1 Security System will trigger if one of the following events occurs while the system is armed:
Attempted Intrusion Identification: Pressing UNLOCK after a full 30 second trigger cycle has completed, the horn will honk 4 times and the LED will flash a number of times to indicate which input triggered the alarm. Turning on the ignition or pressing the valet/override button will reset the LED flashes, pressing the valet/override button will also honk the horn to match the LED flashes before it resets.
|Emergency Disarm Procedure||
If your remote control is lost or fails to function, use this procedure to disarm the MM1 Security System and start your vehicle.
Changing the Remote Control Battery: The 3 volt lithium battery (model CR2032) inside each remote control should last approximately 1 year under normal use. When the battery becomes weak you will notice the remote control range (the distance from the vehicle the remote control will work) deteriorate and the small LED on the remote control will dim. To replace the remote control batteries:
Adding Remote Controls to Your System: The MM1 Security System has the ability to operate from up to 4 remote controls. Follow these steps to add a remote control to your system.
Deleting Lost or Stolen Remote Controls from Your System: If one of your remote controls is lost or stolen, follow these steps to remove it from your system:
For more detailed operating instructions, please refer to your Owner's Manual.
Thank you for your inquiry - Audiovox values our customers and though this product is no longer in production nor does it qualifiy for warranty or repair due to the age of the product, limited support information may be available through our FAQ Database and/or Customer Service.
Before you proceed check this and other answers related to your product by searching with the Model Number of your product from the Search Box above.
NOTE: Technical support, parts, user manuals (not shown on this FAQ), accessories, or repairs are either limited or NOT available for discontinued models.