Articles in this section

See more

Menu, Icons and Features for the Code Alarm CA680 Remote Start Security System

Avatar
CS
Updated
Follow

Additional Features for the Code Alarm CA680 Remote Start Security System

Additional Dot Matrix Remote Control Functions 
Display Illumination

Press and release the “F” button on the LCD remote control one time. The display will illuminate for 10 seconds.

Vibrate or Tones

Press an release the “F” button and the UNLOCK icon button on the LCD remote control simultaneously one time to toggle between beep tones and vibrate mode. The LCD remote control will either beep or vibrate to indicate which mode is selected.
Page Call Out From within the vehicle, press and hold the emergency override button for 4 seconds, the LCD remote control will emit a beep tone to indicate that someone is calling you to the vehicle.
Countdown Timer The Dot Matrix remote control is equipped with a countdown timer for situations where an alert tone may be needed to remind you of something important. The countdown timer allows you to set the timer up to 19 hours and 59 minutes. Refer to the Menu information below.
Parking Meter Timer The Dot Matrix remote control is equipped with a parking meter timer that allows you to set a countdown timer for 10, 20, 30, 60, 90 or 120 minutes. The LCD remote control will emit a beep tone when the timer expires. Press ”F” and OPTION simultaneously to select desired time.
Alarm Clock The Dot Matrix remote control is equipped with a built in alarm clock that can be set to beep at a certain time each day. The alarm clock must be set, and the feature turned on. Refer to the Menu information below.
Bypassing The Shock Sensor

There are 3 additional modes of operation in which your system will react to the shock sensor, FULL TRIGGER ONLY, ALL OFF, or CITY MODE.

  1. Press LOCK once to arm the system.
  2. Pressing LOCK again within 2 seconds will set the system to FULL TRIGGER ONLY in which the system will ignore the light touch setting.
  3. Pressing LOCK again within 2 seconds will set the system to ALL OFF. In this mode the system will not react to the shock sensor and the 2-way LCD remote will display the shock sensor icon.
  4. Pressing LOCK again within 2 seconds will set the system to CITY MODE. In this mode the light touch horn output is extended to a full 10 seconds and full trigger horn output is shortened to 15 seconds, no icon is displayed.
Check Vehicle Status Press the LOCK icon button, TRUNK icon button and OPTION button simultaneously for 1 second. The Dot Matrix remote control will display the system’s current status.
Check Temperature Press the TRUNK icon button and OPTION button simultaneously for 1 second. The LCD remote control will display the vehicle’s interior temperature.
Trigger History This feature allows you to review the last four triggers to the system from the Dot Matrix remote control. See the Dot Matrix Remote Control Options Menu below.
Language Set The Dot Matrix Remote allows the user to select from three different languages for the on screen text, English (default), French and Spanish. See the Dot Matrix Remote Control Options Menu below.
Homepage Select This feature lets the user select between a text or icon display to indicate vehicle status. See the Dot Matrix Remote Control Options Menu below.
Homepage Option Set This feature allows you to select between displaying the clock or personalized text on the screen. See the Dot Matrix Remote Control Options Menu below.
Set Name for Channel The systems AUX outputs, referred to as channels on the remote control can be customized with personal text to describe the feature that it may be being used for. See the Dot Matrix Remote Control Options Menu below.
Battery Save Mode Press the LOCK icon button and “F” button simultaneously. Note that in this mode the remote will not send or receive vehicle status unless you press a button on the remote.
Optional Song Bird Feature

The optional Song Bird feature (Code Alarm SB1 accessory Speaker and labor required) allows you to program songs and tones to your system (i.e. Setting a different tone for Lock activation and unlock activation).

Turning Song Bird On:

  1. Press and release the TRUNK icon button on the remote control.
  2. Press and hold the LOCK icon button on the remote control within 2 seconds. The speaker will give notification that Song Bird has be turned ON.

Turning Song Bird Off:

  1. Press and release the TRUNK icon button on the remote control.
  2. Press and hold the UNLOCK icon button on the remote control within 2 seconds. The speaker will give notification that Song Bird has be turned OFF.

Setting Song Bird Tones:

  1. Activate the function you wish to program a Song Bird tone to.
  2. Within 3 seconds, press and release the TRUNK icon button on the remote control.
  3. Press the OPTION button on the remote control within 2 seconds.
  4. Press the LOCK icon button on the remote control or UNLOCK icon button on the remote control to scroll through the different tones. While in this mode the TRUNK icon button on the remote control will change the length or version of the tone (if applicable).
  5. Press the OPTION button on the remote control to select the desired tone and exit programming.

Please see your sales associate for details on Song Bird or any other Code Alarm accessory.

Dot Matrix Remote Control Options Menu
Accessing the Options Menu
  1. Press and hold the “F” button for 3 seconds.
  2. Use the TRUNK or OPTION button to scroll up and down through the menu.
  3. Press the “F” button to select the setting to change.
  4. Use the LOCK/UNLOCK buttons to move the cursor left and right (where needed). Use the TRUNK/OPTION buttons to change up/down alpha/numeric symbols.
  5. Press “F” to keep setting and back out to previous menu.
  6. Press and hold “F” for 3 seconds to exit options menu.

Selectable Features in the Options Menu:

  • 12-1 Trigger History: Records the previous four triggers
  • 12-2 Time Set
  • 12-3 Alarm Clock
  • 12-4 Countdown Timer
  • 12-5 Vibrate/Tone
  • 12-6 Alarm Clock Music
  • 12-7 Temperature Set Celsius, Fahrenheit
  • 12-8 Language Set English, French, Spanish
  • 12-9 Homepage Select Text Mode, Icon Mode
  • 12-10 Homepage Option Set Clock, Personalized Text
  • 12-11 Set Name for Channel Personalize AUX Outputs 1-4/Channels 4-7
  • 12-12 Set to Default

Note: Personalized sections in the Options menu allow you to change the text that appears on the screen.

Optional Screen Icons and their Indications (Icon Mode only)

Security Functions:
Image

Image

Remote Start Functions
Image


For more detailed operating instructions, please refer to your Owner's Manual.

ote: You may have to login if you haven't already.


STILL NE

Comments

0 comments

Article is closed for comments.