Remote Operation for the Code Alarm CA680 Remote Start Alarm System
|Arming the Security System||
To arm the system:
To arm the system silently:
If the horn system sounds and the parking lights flash only once, this indicates that the vehicle’s interior light is on or an entrance is left open.
The system is now fully armed. (If the entrance is not secured within 4 minutes, the system will arm and ignore the unsecured entrance until it is closed.)
|Disarming the Security System||
To disarm the system:
To disarm the system silently:
|Disabling/Enabling Confirmation Chirps||
|Attempted Intrusion Identification||
This system will inform you if an intrusion attempt has occurred while you were away from the vehicle. If an intrusion attempt occurred, the system will sound 4 times and the parking lights will flash 3 times when disarming the system. Enter the vehicle an observe the dash mounted status LED to Identify which zone was triggered.
The intrusion warning indicators are stored in the system’s memory and will be erased when the ignition key is turned on.
|Two Stage Door Unlock (Optional)||If this feature is enabled on your system, pressing the UNLOCK icon button one time on the remote control will unlock only the driver’s door. Press disarm again to unlock the remaining doors.|
|Activating the Trunk Release Feature (Optional)||If this feature is enabled on your system, pressing and holding the TRUNK icon button on|