Using the Controls on the Jensen NVX430BT Navigation System

Using the Controls on the Jensen NVX430BT Navigation System 

Hardware buttons
Hardware buttons are mostly used on map screens to zoom, tilt and rotate the map, or to open other screens. In addition you can use the direction buttons and Enter on list screens to make your selection.

1. Touch Screen - Display the local map. Tap the screen with the stylus
to select menu commands or enter information.

Back View

2. Loudspeaker - Playback language statements and warnings.
3. Stylus - Take the Stylus out of its compartment in order to use it, and replace it after use. The Stylus is for operating the touch screen.

Top/Bottom View

4. Top mounting hole for bracket
5. Power Button - Press and hold Power button for about two seconds to Wake up the unit.
6. USB Interface – Connects to a PC by means of the ActiveSync (USB) Cable (for data updating).
7. Bottom mounting holes for bracket

Left / Right View

8. SD/MMC slot - Accepts an optional SD (Secure Digital) or MMC (Multi Media Card) Card for removable storage.
9. Headphone Interface (3.5mm) - Connects to a pair of stereo headphones.
10. DC Adaptor Port - Connection to external power supply Vehicle or AC adapter (5VDC, 2A).
11. External Aerial Interface - Interface for an external aerial antenna.
12. Volume (>/<) – Rocker switch adjusts the volume level up and down.
13. Battery On/Off Switch - Switch it to ON/OFF position to turn the power On/Off. Switch OFF for long term storage to conserve battery

Connecting to a PC for Map Update*

1. Insert the CD into the computer disc drive.
2. Install the Microsoft ActiveSync from CD.
Note: Active Sync can be downloaded from Microsoft Website.
3. Using the USB cable, connect the NVX430BT to the computer USB port.
4. Run the Microsoft ActiveSync program.
5. Power on the Navigation unit.
6. Unit should connect to Microsoft ActiveSync and ’’Set Up a Partnership’’ screen should pop on.
7. Select ’’NO” ; then select Next to finish setup

Using the Keypad/Keyboard

You can access the User's Manual here