Using the Main Menu and Indicators on the Jensen NVX225 GPS Navigation System
1 Jensen logo
2 Battery Status indicator
3 Button to open Cockpit screen
4 Button to open Find menu
5 Button to open Settings
6 Button that displays GPS Status and
7 Opens GPS Data screen
8 Current position
9 Current date and time
10 Button to open Map screen
11 Button to open About screen
It is here to inform you about the map licenses you have, the creators of The NVX225
Navigator and the legal aspects of using the program.
GPS Data screen
Tap the small satellite dish icon in the Main menu to open this screen. The GPS Data screen is a collection of information received from the GPS device and it also serves as the entry point to the Time Sync screen.
The virtual sky on the left represents the currently visible part of the sky above you,
with your position as the center. The satellites are shown at their current positions.
The GPS receives data from the green and gray satellites but not from the red ones. Signals from the gray satellites are only received, while green ones are used by the GPS to calculate your current location. On the right you can see the satellite signal strength bars. Gray bars are for the gray and black bars are for the green satellites. To identify satellites use their numbers also shown in the virtual sky. The more satellites your GPS tracks (the green ones), the better your calculated position will be.
Additional pieces of information on this screen are: current position in
latitude/longitude format, elevation, speed, date, time and calculated accuracy.
Note: Accuracy can be affected by several factors the GPS cannot take into account.Use this accuracy information only as estimation.
There are two icons on the left to show the status of the GPS connection and the
quality of reception.
The most important and most frequently used screens of The NVX225 Navigator are
the two screens with the map (Map screen and Cockpit screen). They are similar in
look and in possible controls but are optimized for different uses. The map they
display is common. The elements of the map are described here. For the controls
and special functions of the two map screens see 4.5 in the User's Manual.
The current version of The NVX225 Navigator is primarily intended for land
navigation. That is why maps in The NVX225 Navigator look similar to paper
road maps (when using daytime colors and 2D map mode). However, The NVX225
24 Navigator provides much more than regular paper maps can. The look and the
contents can be changed.
There are so many features that the best thing for you to do to learn more about these features is to read the User's Manual for the Map Section: Section 4
Access the User's Manual here