Operating Instructions for Code Alarm SRT9000 Remote Start Security System

Operating Instructions for Code Alarm SRT9000 Remote Start Security System 

Charging the Battery:

When the screen displays low battery or the battery icon is flashing, then it is time to recharge your remote transmitter using the supplied plug-in home charger.

• While the built-in 3.7V lithium polymer battery is being charged, you can push the side button to check it's charging status.
• When the screen displays "Battery Full", unplug the charger.
• It is necessary to charge the battery before initial use.

Main Display:

To display them main page of the transmitter press the icon button, the screen will display the main display page and the system status. In the case that an icon is flashing on the main display page press the icon button once again to view the detail of the flashing icon as in the following examples.

When "Triggered" is displayed, press the icon button to display which input was triggered.

When the remote start icon is flashing, press the icon button to display the remote start status.

When the count down timer icon is flashing, press the icon button to display the count down timer. Use buttons numbered 1-4 to start, stop or exit the countdown time mode.

When the start timer icon is flashing, press the icon button to display the daily start timer, timer start or temperature start, depending on which you have selected.

When the alert alarm timer icon is flashing, press the icon button to display the alert alarm timer. Use buttons numbered 1-4 to start, stop or exit the alert alarm timer mode.

<p style="FONT-WE