Operating Instructions for APS901 Remote Start System

Operating Instructions for Prestige APS901 Remote Start System
Remote Starting the Vehicle:	The unit will not start the vehicle if any one of the following situations exists: The vehicle's hood lid is opened. The gear shift selector in not in Park. The brake pedal is depressed. The safety control switch is in the off position.  To start the vehicle: Press and release the transmitter button two times within 2 seconds. The vehicle will start and remain running for the preprogrammed run cycle. As a visual indication, the parking lights will flash or remain on depending on the setting by your installation center. When you arrive at the vehicle, turn the ignition key to the on position (not the start position). Step on the brake pedal to disengage the remote starter. The vehicle will continue to run but now on its own power.
Unlocking the Vehicle:	If you have electric door lock and the optional lock feature was added, with the vehicle running under command of the remote start unit, press and hold the transmitter button for 3 seconds until the doors unlock.
PRLED Safety Control Switch:	The push-button control switch allows you to temporarily disable the remote starting function of the system. To place the system in the service mode: With the system disarmed/unlocked and the ignition switch off, press and hold the PRLED on. Turn the ignition switch on, off, on, off, on, off. The LED begins to flash two short flashes followed by one long flash and continues this pattern until returned to normal mode of operation. This puts the unit into the R/S Override mode indicating that the remote start is in the service mode and will not start from RF or any other input Posse or otherwise. To exit R/S Override Mode: With the system disarmed, press and hold the PRLED on. Turn the ignition switch on, off, on, off, on, off. The LED turns off indicating that the R/S unit is fully functional once again.
Car Finder Mode:	Anytime the vehicle is not running under control of the remote start unit, within operating range of the vehicle, press and hold the transmitter button for 4 seconds to activate the car finder mode. The vehicle lights will flash for 30 seconds or until the button is again pressed and released.
Telematic Upgrade:	This system has the ability to have a telematic upgrade module connected to it. This is an upgrade that can give you control of certain functions of your vehicle from a Telephone or in some cases a computer interface. Please check with your installation center for the most recent Telematic Upgrades. If you had a Telematic Upgrade installed, the manual supplied with the upgrade unit will provide an operator's manual advising you of the features of the system and means available to control these features of your vehicle.

For more detailed operating instructions, please refer to your
Owner's Manual.