Operating Instructions for APS905 Remote Start System

Operating Instructions for Prestige APS905 Remote Start System
Keyless Entry:	The lock button on the transmitter is used to lock the vehicle's doors, the unlock button is used to unlock the doors. To lock or unlock the doors:   Simply press and release the desired function button one time. As a keyless entry unit, the parking lights will flash once when the doors are locked and twice when the doors are unlocked.
Remote Car Finder:	The lock or unlock buttons are also used to access the car finder mode. To access the car finder mode, while within range of your car: Simply press and hold either the lock or unlock button of your transmitter for three seconds. The parking lights will begin to flash making your vehicle more visible. The lights will stop automatically after 30 seconds. If you wish to turn off the car finder mode prior to the expiration of the 30 second timer, press and release either the lock or unlock button of your transmitter one time.
Remote Trunk Release:	If you have electric trunk release in your vehicle and the remote trunk release option was added to your vehicle, simply press and hold the Trunk/Key button of your keychain transmitter for 3 seconds or until the electric trunk of your vehicle opens.
Remote Starting the Vehicle:	The unit will not start the vehicle if any one of the following situations exists: The vehicle's hood lid is opened. The gear shift selector in not in Park. The brake pedal is depressed. The safety control switch is in the off position. To start the vehicle: Press and release the trunk/key button two times within 2 seconds. The vehicle will start and remain running for the preprogrammed run cycle. As a visual indication, the parking lights will flash or remain on depending on the setting by your installation center. When you arrive at the vehicle, turn the ignition key to the on position (not the start position). Step on the brake pedal to disengage the remote starter. The vehicle will continue to run but now on its own power.
Flashlight Button:	The one way transmitter has a flashlight built into the unit for your convenience. Press the flashlight icon button of your transmitter to cause the LED on the end of the transmitter to light. The light will turn off when the button is released.
Turbo Timer Mode:	This system provides a means to cool down the vehicle's turbo charger, if so equipped, by allowing the vehicle to continue to run for a prescribed period of time every time the vehicle's engine is turned off. This feature requires the system to be set up for turbo timer during installation. Consult with your installation center to be certain this feature was activated and how long the vehicle will continue to run after the ignition switch is turned off. To activate the turbo timer: Anytime the engine in running for more than 15 seconds, place the gear selector in Park. Set the parking brake. Be certain your foot is off the brake pedal. Press the valet/program switch 2 times within 5 seconds. The parking lights will flash two times indicating the mode was successfully entered. If your parking lights flashed four times, this indicates the turbo mode was on and is now turned off. With the turbo time