Operating Instructions for AA925 Keyless Entry System

Operating Instructions for AA925 Keyless Entry System
Remote Door Locking - Active:	Turn off the ignition, exit the vehicle, and close all doors, hood lid and trunk lid. Press and release the Arm/Lock button on the key chain transmitter one time. The doors will lock, the LED will begin to flash slowly.
Silent Locking - Active:	Turn off the engine, exit the vehicle and close all doors, hood lid and trunk lid. Press and hold the Arm/Lock button on the key chain transmitter for two seconds. The doors will lock, the parking lights will flash once and the red dash mounted LED will flash slowly.
Backup Passive Operation (Automatic):	Turn the ignition key off, exit the vehicle, and close all doors, hood lid, and trunk lid. The LED will begin to flash rapidly, 30 seconds later the system is armed. Opening any protected entry point during the 30 second passive arming cycle will immediately suspend automatic arming and the 30 second passive arming cycle will re-start when all doors are closed. At the end of the passive arming cycle the LED begins to flash slowly, the parking lights flash one time, the siren/horn sounds one chirp and the door locks are optional.
Protection while the system is armed:	If the optional Starter Interrupt relay has been installed, then whenever the system is armed, the vehicle starter circuit is disabled. Thus, even with the ignition key, the vehicle will not start. Whenever the system is armed, the dash mounted LED will slowly flash. This serves as a visual deterrent to a potential thief. This LED is a very low current light emitting diode and will not drain the battery even if left unattended for long periods of time.
Unlocking the System:	As you approach the vehicle, press and release the Disarm/Unlock button on the key chain transmitter. The doors will unlock, the parking lights will flash two times, the vehicle horn (or optional siren) will chirp twice and the dash mounted LED will turn off. If you have the optional entry illumination circuit installed, the interior light will turn on for 30 seconds or until the ignition key is switched on. Note: If the passive arming mode was selected at time of installation, the dash mounted LED will start flashing rapidly indicating that the system is rearming. Opening any door will suspend the automatic arming.
Silent Unlocking:	As you approach the vehicle, press and hold the Disarm/Unlock button on the key chain transmitter for 2 seconds. The doors will unlock, the LED turns off, the parking lights flash two times. Note: If the passive arming mode was selected at time of installation, the dash mounted LED will start flashing rapidly indicating that the system is rearming. Opening any door will suspend the automatic arming.
Optional Access Guard (Two Step Unlock):	If the optional 2 step unlock feature was installed, then only the driver's door will unlock after the first press of the unlock button. If you want to unlock all doors, you can simply press the unlock button of the keychain transmitter a second time. <span style="FONT-STYLE: italic; COLOR: #