Operating Instructions for PRO9276 or PRO9276A Remote Start System

Operating Instructions for PRO9276 Remote Start System
Keyless Entry	To lock your vehicle:  Exit the vehicle. Close all doors, the hood and the trunk. Press the lock button of your key chain transmitter. As a keyless entry unit, for your convenience, the parking lights will flash once when the doors are locked and twice when the doors are unlocked. If the optional illuminated entry feature has been added, the interior light will turn on when the doors are unlocked and remain on for 30 seconds or until the ignition is turned on. Holding the lock/unlock transmitter button for 3 seconds will activate the car finder mode causing the parking lights to flash and the optional horn to beep for 30 seconds or until the ignition is activated again for 3 seconds or any other button is operated. Note: This system has the ability to unlock the drivers door with the first press of the unlock transmitter button and then unlock all other doors when the unlock button is pressed a second time. This optional feature may require additional components. Consult your installation center to determine if this feature has been added to your vehicle.
Additional  Remote Function (Channel 3)	This system has an additional feature that can be connected to a number of different optional accessories. Some of the more common uses for this channel are: Remote Trunk Release Remote Window Closure Remote Garage Door Interface To activate the optional accessory, press and hold the Trunk/Key button on the key chain transmitter for 4 seconds. Note: The feature that has been added to channel 3 will always be activated using the same transmitter button that remotely starts the vehicle. There is no way to move the channel 3 function to a different transmitter button. Note: If your system utilizes the transmitter shown, the second option button may be configured to operate additional accessories. Please consult your installing retailer for more information concerning the options available.
Additional  Remote Function (Channel 4)	This system has an additional feature that can be connected to a number of different optional accessories. Some of the more common uses for this channel are: Can be set up to activate Rear Window Defogger during remote start if vehicle is so equipped. Remote Window Closure Rear Hatch Release Right or Left Slider doors in an equipped van To activate the optional accessory, press the option button on the key chain transmitter. The optional accessory will immediately engage. Note: If your system utilizes the transmitter shown, the second option button may be configured to operate additional accessories. Please consult your installing retailer for more information concerning the options available.
Additional  Remote Function (Channel 5)	This system has an additional feature that can be connected to a number of different optional accessories. Some of the more common uses for this channel are: Remote Trunk Release Remote Window Closure Rear Hatch Release Right or Left Slider Doors in an equipped van To