Troubleshooting the Audiovox GMRS1262 Two Way Radios

Troubleshooting the Audiovox GMRS1262 Two Way Radios
Problem:	Solution:
Why is there no transmission while pressing the PTT Button on my GMRS1262?	Make sure the battery is fresh and is installed with the correct polarity observed.
Why is there a weak signal or no signal on my GMRS1262?	Make sure the battery is fresh and is installed with the correct polarity observed. Adjust the transceiver's channel and privacy settings to match those settings of the target transceiver. Increase the volume level. Make sure the PTT Button was not inadvertently depressed. Change the transceiver to a different channel to reduce radio interference. Avoid operating in a near large buildings or vehicles because this may cause obstruction of the radio signal.
Why does my GMRS1262 beep, but will not function when turned on?	Charge or replace the batteries as they are extremely discharged.
Why am I getting reception of unwanted signals on my GMRS1262?	Make sure the CTCSS privacy mode is on. Set the code number to match the setting of the target transceiver. There may be interference from electronic devices such as computers or TV's. Please turn these devices off or move farther away from them.