Troubleshooting the Audiovox D1730 Portable DVD Player
|
Problem
|
Solution
|
Why is there no power to my D1730? |
- Make sure the On/Off Switch is in the On position.
- Make sure your DVD is connected properly.
- Make sure all cables are securely inserted into the appropriate jacks.
|
Why isn't an image appearing on the screen of my D1730? |
- Check if the unit is connected securely.
- Make sure you operate the TV correctly.
- Make sure you set the color system correctly.
|
Why is there bad sound quality on my D1730? |
- Make sure the audio output mode is set correctly.
- Make sure the audio connection between the unit and amplifier is right.
|
Why won't a disc play in my D1730? |
- There is no disc in the unit.
- Put the disc on the disc tray properly with the label side up.
- Clean the disc.
- Moisture has condensed in the unit. Remove the disc and leave the unit on for about one hour.
|
Why won't the remote control to my D1730 work? |
- Remove barriers between the remote control and the unit.
- Point the remote control at the remote control sensor of the unit.
- Replace the batteries with new ones.
|
Why is the image rolling with no color on my D1730? |
- The color system of the unit doesn't match with that of TV. Please select the correct TV TYPE until TV shows normal color.
|
Why is there no sound or distorted sound on my D1730? |
- Make sure your DVD is connected properly.
- Make sure all cables are securely inserted into the appropriate jacks.
- Be sure that the systems settings are correct and that the volume is turned up.
- The sound system of the DVD also needs to be set up correctly.
- The disc cannot be dirty or warped. If so, you need to replace it.
- Also, if there are headphones connected to the headphone jack, these need to be removed.
|
Why is my D1730 getting warm? |
- The unit will become warm when it is used for a long period of time.
- This is normal and does not indicate a problem with the unit.
|
How do I clean the D1730? |
- When cleaning, make sure the system is unplugged from the power source.
- Do not use liquid cleaners or aerosol cleaners.
- Use a cloth lightly dampened with water or one of our Surface Clean products for cleaning the exterior of the system only.
|
What is the default password for my D1730? |
- The password is automatically factory set to 99999.
|
Comments
0 comments
Article is closed for comments.