RF Programmable Features for PRO9801 Remote Start Security System
What are the RF Programmable Features to the PRO9801 Remote Start Security System?
The selectable features can be set manually as explained below, or with the RF feature programmer. To set features using the RF programmer, follow the instructions packaged with the programmer.
Notes:
- The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.
- Keyless Entry Models with no horn output will Flash the Parking Lights instead of chirp where chirp is indicated.
- No data will be indicated if a feature is not available for a particular model. The unit will enter the feature but no selection will be available.
RF Programmable Feature Bank 1 is for Transmitter Programming See Transmitter Programming Guide.
Factory default settings are indicated by bold text.
|
RF Programmable Features Bank 2 is Alarm Selectable Features |
||||||
|
Feature |
1 Chirp |
2 Chirps |
3 Chirps |
4 Chirps |
5 Chirps |
6 Chirps |
| 1. Door Lock/UL |
1Sec |
3.5Sec |
1Sec L/Dbl UL |
Dbl L, 1 Sec UL |
Dbl L, Dbl UL |
1 Sec L/350mS UL |
| 2. Accy Lock |
On |
Off |
- |
- |
- |
- |
| 3. Accy Unlock |
Driver |
All |
Off |
- |
- |
- |
| 4. Headlights |
On Arm |
On Disarm |
On Both |
Off |
- |
- |
| 5. Passive Locks |
Passive |
Active |
- |
- |
- |
- |
| 6. Passive / Active Arm |
Passive Arm |
Active Arm |
- |
- |
- |
- |
| 7. Siren/Horn |
Siren/Horn |
Siren Only |
Horn Only |
- |
- |
- |
| 8. Horn Chirp |
10mS |
16mS |
30mS |
40mS |
50mS |
- |
| 9. Override Method |
Custom Code |
Valet |
- |
- |
- |
- |
| 10. Two Step Unlock |
On |
Off |
- |
- |
- |
- |
| 11. Chirp Delete From Tx |
On |
Off |
- |
- |
- |
- |
| 12. Voltage |
Not Available |
- |
- |
- |
- |
- |
| 13. Trigger Circuits |
Not Available |
- |
- |
- |
- |
- |
| 14. L/UL Poll |
Not Available |
- |
- |
- |
- |
- |
To Program these Selectable Features:
| Feature: | Action: | Response: |
| Turn Ignition On | No response | |
| Press and Release the valet switch 3 times | 1 Chirp, LED 1 flash | |
| Within 3 seconds, turn ignition off Then On This action accesses feature Bank 2 Alarm Selectable Features |
Short Chirp, then long chirp | |
| First | Press and Release the valet switch 1 time | 1 chirp |
| Press Transmitter lock button to change | 2 chirps | |
| Press Transmitter lock button to change | 3 chirps | |
| Press Transmitter lock button to change | 4 chirps | |
| Press Transmitter lock button to change | 5 chirps | |
| Press Transmitter lock button to change | 6 chirps | |
| or | ||
| Second | Press and Release the Valet Switch | 2 chirps |
| Press Transmitter lock button to change | 1 chirp | |
| or | ||
| Third | Press and Release the valet switch | 3 chirps |
| Press Transmitter lock button to change | 1 chirp | |
| Press Transmitter lock button to change | 2 chirps | |
| or | ||
| Fourth | Press and Release the valet switch | 3 chirps |
| Press Transmitter lock button to change | 4 chirps | |
| Press Transmitter lock button to change | 1 chirp | |
| Press Transmitter lock button to change | 2 chirps | |
| or | ||
| Fifth | Press and Release the Valet Switch | 2 chirps |
| Press Transmitter lock button to change | 1 chirp | |
| or | ||
| Sixth | Press and Release the Valet Switch | 2 chirps |
| Press Transmitter lock button to change | 1 chirp | |
| or | ||
| Seventh | Press and Release the valet switch | 1 chirp |
| Press Transmitter lock button to change | 2 chirps | |
| Press Transmitter lock button to change | 3 chirps | |
| or | ||
| Eighth | Press and Release the Valet Switch | 2 chirps |
| Press Transmitter lock button to change | 3 chirps | |
| Press Transmitter lock button to change | 4 chirps | |
| Press Transmitter lock button to change | 5 chirps | |
| Press Transmitter lock button to change | 1 chirp | |
| or | ||
| Ninth | Press and Release the Valet Switch | 2 chirps |
| Press Transmitter lock button to change | 1 chirp | |
| or | ||
| Tenth | Press and Release the Valet Switch | 2 chirps |
| Press Transmitter lock button to change | 1 chirp | |
| or | ||
| Eleventh | Press and Release the Valet Switch | 2 chirps |
| Press Transmitter lock button to change | 1 chirp | |
| or | ||
| Twelfth | Press and Release the Valet Switch | Non functional on this unit |
| or | ||
| Thirteenth | Press and Release the Valet Switch | Non functional on this unit |
| or | ||
| Fourteenth | Press and Release the Valet Switch | Non functional on this unit |
| or | ||
| Press and Release the Valet Switch or turn the ignition off | Exit Programming Mode | |
| or | ||
| Turn ignition switch off then on | Advance to feature Bank 3 |
Note: Once you enter the feature-programming mode, do not allow more that 15 seconds to pass between steps, or the programming will be terminated.
When using the RF programmer, enter the program mode as follows:
- Turn the ignition on.
- Press and release valet switch 3 times.
- Turn ignition off then on.
- Press and hold valet switch for 5 seconds.
- Siren chirps 2 times indicating access to RF feature program mode.
- To exit program mode, turn ignition off, or press and release valet switch.
|
RF Programmable Features Bank 3 is Remote Start Selectable Features |
||||||
|
Feature |
1 Chirp |
2 Chirps |
3 Chirps |
4 Chirps |
5 Chirps |
6 Chirps |
| 1. Defrost Output |
Pulsed |
10 Mins |
- |
- |
- |
- |
| 2. RF Start Chirp |
Off |
On |
- |
- |
- |
- |
| 3. Run Time |
5 Mins |
10 Mins |
15 Mins |
20 Mins |
- |
- |
| 4. Parking Lights |
On Steady |
Flashing |
- |
- |
- |
- |
| 5. Input Check |
Voltage |
Tach |
- |
- |
- |
- |
| 6. Voltage Level |
>0.5V B4 Start |
<0.5V B4 Start |
- |
- |
- |
- |
| 7. Ign. 2 Select |
Off During Crank |
On During Crank |
Same as Accy. |
- |
- |
- |
| 8. Ign. 3 Select |
Off During Crank |
On During Crank |
Same as Accy. |
- |
- |
- |
| 9. Diagnostics |
Off |
On |
- |
- |
- |
- |
| 10. Crank Time |
0.8 Sec |
1.0 Sec |
1.5 Sec |
2.0 Sec |
- |
- |
| 11. Gas/Diesel |
Gas |
Diesel 10 |
Diesel 15 |
Diesel 20 |
- |
- |
| 12. Transponder O/P |
While R/S On |
During Start |
Until Ign. Off |
- |
- |
- |
| 13. Temp Start |
Off |
On |
- |
- |
- |
- |
| 14. Crank Averaging Note: When averaging, the engine must be started 4 times with the key to be effective. |
Averaging |
Preset Time |
- |
- |
- |
- |
| 15. R/S Shock |
Shunt Until Clear |
Shunt R/S Cycle |
Shunt from Tx |
- |
- |
- |
| 16. Turbo Select |
Off |
3 Mins |
5 Mins |
10 Mins |
- |
- |
| 17. Black/Blue (Aux O/P) |
Single Pulse |
As Feat #1 |
- |
- |
- |
- |
| Feature: | Action: | Response: |
| Turn Ignition On | No response | |
| Press and Release the valet switch 3 times | 1 Chirp, LED 1 flash | |
| Within 3 seconds, turn ignition off Then On This action accesses feature Bank 3 Remote Start Selectable Features |
Short Chirp, then 2 long chirps | |
| First | Press and Release the valet switch 1 time | 1 chirp |
| Press Transmitter lock button to change | 2 chirps | |
| or | ||
| Second | Press and Release the Valet Switch | 2 chirps |
| Press Transmitter lock button to change | 1 chirp | |
| or | ||
| Third | Press and Release the Valet Switch | 2 chirps |
| Press Transmitter lock button to change | 3 chirps | |
| Press Transmitter lock button to change | 4 chirps | |
| Press Transmitter lock button to change | 1 chirp | |
| or | ||
| Fourth | Press and Release the Valet Switch | 1 chirp |
| Press Transmitter lock button to change | 2 chirps | |
| or | ||
| Fifth | Press and Release the valet switch | 2 chirps |
| Press Transmitter lock button to change | 1 chirp | |
| or | ||
| Sixth | Press and Release the Valet Switch | 1 chirp |
| Press Transmitter lock button to change | 2 chirps | |
| or | ||
| Seventh | Press and Release the Valet Switch | 2 chirps |
| Press Transmitter lock button to change | 3 chirps | |
| Press Transmitter lock button to change | 1 chirp | |
| or | ||
| Eighth | Press and Release the valet switch | 2 chirps |
| Press Transmitter lock button to change | 3 chirps | |
| Press Transmitter lock button to change | 1 chirp | |
| or | ||
| Ninth | Press and Release the valet switch | 1 chirp |
| Press Transmitter lock button to change | 2 chirps | |
| or | ||
| Tenth | Press and Release the Valet Switch | 2 chirps |
| Press Transmitter lock button to change | 3 chirps | |
| Press Transmitter lock button to change | 4 chirps | |
| Press Transmitter lock button to change | 1 chirp | |
| or | ||
| Eleventh | Press and Release the Valet Switch | 1 chirp |
| Press Transmitter lock button to change | 2 chirps | |
| Press Transmitter lock button to change | 3 chirps | |
| Press Transmitter lock button to change | 4 chirps | |
| or | ||
| Twelfth | Press and Release the Valet Switch | 1 chirp |
| Press Transmitter lock button to change | 2 chirps | |
| Press Transmitter lock button to change | 3 chirps | |
| or | ||
| Thirteenth | Press and Release the Valet Switch | 1 chirps |
| Press Transmitter lock button to change | 2 chirps | |
| or | ||
| Fourteenth | Press and Release the Valet Switch | 1 chirp |
| Press Transmitter lock button to change | 2 chirps | |
| or | ||
| Fifteenth | Press and Release the Valet Switch | 1 chirp |
| Press Transmitter lock button to change | 2 chirps | |
| Press Transmitter lock button to change | 3 chirps | |
| or | ||
| Sixteenth | Press and Release the Valet Switch | 1 chirp |
| Press Transmitter lock button to change | 2 chirps | |
| Press Transmitter lock button to change | 3 chirps | |
| Press Transmitter lock button to change | 4 chirps | |
| or | ||
| Seventeenth | Press and Release the Valet Switch | 1 chirp |
| Press Transmitter lock button to change | 2 chirps | |
| Press and Release the Valet Switch or turn the ignition off | Exit Programming Mode |
Thank you for your inquiry - Audiovox values our customers and though this product is no longer in production nor does it qualifiy for warranty or repair due to the age of the product, limited support information may be available through our FAQ Database and/or Customer Service.
Before you proceed check this and other answers related to your product by searching with the Model Number of your product from the Search Box above.
NOTE: Technical support, parts, user manuals (not shown on this FAQ), accessories, or repairs are either limited or NOT available for discontinued models.
Comments
0 comments
Article is closed for comments.