Additional Remote Features for PRO9801 Remote Start Security System

Transceiver Icons and Their Indications for PRO9801 Remote Start Security System
	When Disarmed, Press the Arm/Lock button to Lock and Arm the System. The Lock Icon is displayed on the LCD panel and the parking lights flash once. When Armed, Press the Disarm/Unlock button to Unlock and Disarm the System. The Unlock Icon is displayed on the LCD panel and the parking lights flash twice. When the Key Icon Button has been operated for 3 seconds the trunk open icon will flash on the LCD screen. If text mode was selected, the words Trunk Open will appear and remain on the screen until the trunk is shut.
	When the Key Icon Button is pressed 2 times in succession three puffs of smoke are displayed on the LCD screen while the vehicle is running. The exhaust indication will flash and the hour glass will indicate count down timer based on the 5, 10, 15, or 20 minute run time set up by your installation center. When the unit shuts off the exhaust indication will turn off and the transmitter will play a melody. Note: The engine can be started in many modes; armed, disarmed, valet, etc... The screen shown is Locked/Armed and running.
	When the Panic Mode has been activated and the system is armed the vehicle's lights will flash, the siren and lock icon will be displayed on the LCD screen and the siren will beep. If the system is disarmed and the Panic Mode is activated, the lights will flash, the unlock icon will be displayed and the siren will beep on the LCD screen.
	Whenever the vehicle is operated from the two way transmitter, the unit will beep responsive to the function executed at the vehicle. 1 beep when armed, 2 beeps when disarmed, etc... At times it may be inconvenient or too noisy to hear the beep tones, so the system allows you to set the unit for vibrate mode. To toggle on or off beep tones/vibrate; Simultaneously press the "F" and unlock buttons. The icon shown left will appear in the upper left hand corner of the screen to indicate vibrate.
	If the alarm system has been triggered, the icon displayed on the transmitter LCD will indicate which zone has been activated, as well as sound the beep tones, or vibrate dependent upon the setting. The following trigger patterns will be displayed. Triggered and the entry attempt was made to one of the vehicle Doors. Triggered and entry attempt was made to the vehicles Hood. Triggered and entry attempt was made to the vehicles Trunk. Triggered and entry attempt was made to the vehicle's glass, or the vehicle has been hit or bumped hard enough to cause a response from the vibration detector.
<p align="ce