Articles in this section

See more

Operating Instructions for JMV111 Overhead System

Avatar
CS
Updated
Follow

Operating Instructions for the Jensen JMV111 DVD Player

How do I turn my JMV111 Mobile DVD Player on or off?
  1. Push the Screen Release Button to unlock the LCD screen. It will drop down slightly.
  2. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use.
  3. Press the Power Button on the unit or the remote control to turn the system on or off. When in use the internal backlighting will illuminate the controls.
  4. Remember to turn the unit off and pivot the LCD screen to the locked position when not in use.

(NOTE: Unit will turn On automatically when a Disc is inserted.) 

What are the different source features for my JMV111 Mobile DVD Player?

DVD:

The DVD input may be selected to operate in DVD mode and watch DVD's. To access the DVD input, turn the JMV111 on and press the remote control until "DVD" is displayed on the screen.

AV1:

The video input may be connected to a Video Cassette Player (VCP), video game system, or other audio / video devices. To access the A/V inputs, turn the unit on and press the source button on the unit or the remote control until "AV1" is displayed on the screen. Turn the video source component on with its power button or remote control. The unit is now ready to play the audio and video signals from the source connected to AV1 input (optional accessory cable part number 8010730 required).

AUX/Game Source:

The unit will accept audio / video input through the 3 RCA jacks located on the rear of the unit. The audio / video device could be a video game system, video camera, or other input device.

(NOTE: the AUX/Game input is a shared input (Priority AUX) when an AUX input is connected it will automatically disable the game input.)

AV2 or TV (Optional):

The video input may be connected to a Video Cassette Player (VCP), Video Game System, or other audio/video device. To access the A/V inputs, turn the unit on and press the source button on the unit or the remote control until AV2 is displayed on the screen.

(NOTE: If the optional TV tuner (PODTVT2) is installed, the AV2 input becomes inactive.)

Video Out:

This unit provides a video output for optional video monitor(s). This output will provide a video signal that duplicates the signal displayed by the unit to an additional monitor or video display. Please see your installer for more information.

What type of discs will my JMV111 Mobile DVD Player play?
  • DVD* disc - DVD discs which contain video.
  • Audio discs - Audio CDs contain musical or sound content only.
  • MP3 discs - A disc that contains audio files (for example, a CD-R with downloaded MP3 files).
  • This system is capable of playing most recordable DVD formats. However, due to the variety of disc manufacturers and software, playback cannot be guaranteed.

How do I load and play a disc on my JMV111 Mobile DVD Player?
  1. Press the Power button to turn the unit ON.</sp

Comments

0 comments

Article is closed for comments.