Charging & General Controls for the SP880SL 808 Canz Wireless Speaker

Charging & General Controls for the SP880SL, 808 Canz Wireless Speaker

Charging 

1. Connect the supplied USB cable into the DC IN of the SP880. Connect the other end of the cable to a USB charging port.
2. The Charging Indicator will turn red while the unit is charging. When charging is complete, the Charging Indicator will turn off.

Important: The battery should be fully charged prior to first use. Whenever the battery is fully discharged, immediately recharge it (regardless of whether you plan to use the battery or not) in order to maximize battery life. If you plan not to use the battery for an extended period of time (one week or longer), we recommend that you fully charge the battery. For longer periods of storage, please recharge the battery at least once every two months to maintain the battery in optimum condition.

Turning On/Off

Power On: Slide the ON/OFF switch to ON at the bottom of the SP880. A power on beep tone will be heard & the PAIR indicator will blink.

Power Off: Slide the ON/OFF switch to OFF at the bottom of the SP880.

General Controls

(1) PAIR Button
• Press & hold for 3 sec to activate pairing mode

(2) PAIR Indicator
• Fast flash: ready for pairing
• Very slow flash: in Standby mode
• Slow flash: reconnecting to the most recently connected device
• Solid blue: Bluetooth connection established

(3) LINE IN
• 3.5 mm auxiliary input jack

(4) DC IN

(5) Charging Indicator
• Red: charging
• Off: battery full

(6) ON/OFF Switch