Operating the Jensen NAV104 Navigation Unit

Operating the Jensen NAV104 Navigation Unit

Basic Use

Step 1 - Access the navigation function: You can access the navigation function by pressing the front panel NAV button.

Step 2 - Start Up: After the iGo primo software starts, you will see the reminder warning to use your iGo primo software safely and lawfully.

Step 3 - Access the Main Menu: Press Accept to access the Navigation Menu.

Step 4 - Select a Destination: You have many ways to select a destination. Select by touching screen:

• Tap FIND to select your destination by entering an address or selecting a place of interest, a location on the map or one of your Favorite destinations. You can also look up your recent destinations from the Smart History, enter a coordinate or use the location saved in a photo.
• Tap MY ROUTE to display the route parameters and the route in its full length on the map. You can also perform route-related actions such as editing or canceling your route, setting a start point for the route, picking route alternatives, avoiding parts of the route, simulating navigation or adding the destination to your Favorites.
• Tap MORE... to customize the way the navigation software works, simulate demo routes, or to run some additional applications.
• Tap SHOW MAP to start navigating on the map. The button itself is a miniature live map that shows your current position, the recommended route and the surrounding map area. Tap the button to enlarge the map to the full screen.

Step 5 - Map/Guide Along Route: Proceed to the highlighted route and drive while the iGo primo software provides guidance to your destination.

Step 6 - Arriving at Your Destination: When you are near your destination, the destination is indicated by a checkered flag symbol.

Operation

Accessing the Navigation Software: Press the MENU button and touch the Navigation icon to access navigation mode.

Adjusting the Navigation Voice Volume: While the Navigation is on and a route has been programmed, the Navigation will speak commands. While the Navigation is speaking, adjust the volume by turning the radio volume knob. The Navigation volume will remain at this level and when done speaking will return to the previous source (i.e., radio) at the volume level set for that source. The main volume must be set above zero in order to hear the spoken directions. If the radio is muted, the Bluetooth (if equipped) engaged in a call, or the volume knob has been turned to zero, the navigation will not be heard but your visual directions will continue.

Selecting / Listening to a Source while Navigating: While navigating, other sources may be selected and listened to such as AM-FM Tuner, CD, etc. To listen to another source while navigating, press the SRC button and then select a source from the Source Menu. Navigation voice prompts will be heard automatically, although the navigation map cannot be seen. To view the navigation screen, but continue to listen to the selected source, press the NAV/ WIDE button.

BUTTONS AND OTHER CONTROLS