Operating the Audiovox LCM45NB LCD Monitor with Rear Camera Input

Operating the Audiovox LCM45NB LCD Monitor

CAMERA SWITCH: 

1. When switch D is pressed and the vehicle is shifted into reverse gear: No function.
2. When switch D is pressed and vehicle is in any other gear: Will display the interior camera image if the optional Interior camera is installed. Will display the rearview camera image if only rearview camera is installed. No function if the optional navigation is the only input.

TURNING THE LCD MONITOR ON/OFF: The LCD Monitor turns ON every time the ignition key is turned ON and system powered up. The monitor turns OFF every the Ignition key is turned OFF and the system powered down.

VIEWING THE REAR OBSERVATION CAMERA IMAGE (optional): If a rear observation camera is installed, the monitor will display the rear observation camera image whenever the vehicle is shifted into the reverse gear. The rear observation camera image turns off automatically any time the gear selector is moved out of the reverse position. When both cameras are installed, pressing the camera switch will display the interior camera image. If only the review camera is installed press and holding the Camera switch on the left side of the monitor will display the review camera image. Releasing the camera button will return the screen to its previous state.

VIEWING THE INTERNAL OBSERVATION CAMERA IMAGE (optional): Press and hold the camera switch (see Figure 1-D) on the left side of the monitor to view the internal camera image. Releasing the camera button will return the screen to its previous state.

VIEWING THE NAVIGATION IMAGE (optional): If a Navigation system is installed, the navigation image will be displayed when the vehicle’s Ignition is turned on.

LCD MONITOR BRIGHTNESS CONTROL: The brightness adjustment control is on the bottom right of the monitor. Rotating the wheel to the right will decrease the brightness. Rotating the wheel to the left will increase the brightness.

SPEAKER VOLUME CONTROL: The speaker volume control is on the bottom left side of the monitor. This control is used only to adjust the rearview camera audio level. The vehicle must be shifted into reverse in order to hear and adjust the camera audio level. Rotating the wheel to the right will decrease the speaker level. Rotating the wheel to the left will increase the audio level.