Installing the Audiovox OE Integration A-DCR-50-PTH G2 Cradle |
Mounting Option |
Optional Mounting Base The G2 cradle is best to be mounted on the vehicle specific mounting base, sold separately. Mounting base solution available from many suppliers, for example iGrip or KUDA. Please visit www.audiovoxproducts.com for more details. |
Choose the Correct Holder Each holder is designed for a different iPhone/iPod model. Identify the holder by the printed text on the back of the holder and choose the correct holder for your iPhone/iPod. |
Installation |
Long Base Installation If the long base will fit your car interior more appropriately than the short one, then please follow the illustration to attach the long base to the cradle. Turn the base clockwise to tighten the base to the cradle. |
Adjusting the Angle To adjust the angle of the cradle, first slide off the holder, then loosen the set screw enough for the cradle to move freely. When you are done adjusting the angle, hold the base and tighten the set screw, and slide the holder back to its place. DO NOT OVER TIGHTEN! |
Connecting the Cradle Attach the iPod dock cable from the kit or headunit into the connector on the back of the cradle. |
Comments
0 comments
Article is closed for comments.